Specifications

Interleaf EP1052 GENERAL, MECHANICAL/ELECTRICAL
96.11.01
M-64
1151SBM2501A
25-1. Paper Take-Up Mechanism
The Paper Take-Up Rolls are normally in their raised (retracted) position so that
they will not hamper proper loading of paper. When the Start Key is pressed, Paper
Take-Up Solenoid (MB-4) SL51 is deenergized causing the Paper Take-Up Rolls
to press the paper stack downward and take up a sheet of paper.
There are Paper Stoppers provided that block the leading edge of the paper stack
as it is loaded on the Table, preventing any portion of the leading edge of the paper
from getting inside. These Stoppers are unlocked at paper take-up, allowing paper
into the copier.
Paper Take-Up Clutch (MB-4) CL51 controls the turning and stop of the Paper Take-
Up Rolls.
Lock Levers
In Standby
At Take-Up
Lever
Rack Gear
Paper Take-Up
Solenoid (MB-4) SL51
Paper Take-Up
Rolls
Paper Stoppers