Operator`s manual

▲
5. Selecting the Original Copy Type
# of Origs key
•
If you’re going to make copies using 1 2, 1 [2in1], or 1 2-[2in1], you need to enter the
number of your originals. Then the copier can arrange the pages in correct order.
▲ ▲ ▲
Setting Even/Odd
➀
Touch
# of Origs
.
➁
Touch
Even
or
Odd
as appropriate.
➂
Touch
Enter
.
Using the 10-Key Pad
➀
Touch
Input #
.
➁
Enter the number of originals from the
10-Key Pad.
➂
Touch
Enter
.
1149O308CA
1149O309CA
When you know the number of originals
If you want the document feeder to count the number of originals for you
Select
Auto Count
to let the document feeder count the number of originals.
➀
Touch
Auto Count
.
➁
Load your originals into the document
feeder.
➂
Press the Start key.
*The document feeder starts feeding the
originals loaded in it to count the
number of originals. (At this time, no
copy cycle is run.)
➃
Unload the originals ejected onto the
Document Exit Tray and reload them
onto the Document Feed Tray. Then,
press the Start key to make copies.
1149O310CA
1151O016AA
•
The maximum number of originals you
can set is 61.
•
To correct a wrong number, press the
Clear key, then enter the correct number.
NOTES
Chapter 3
Making Copies
45