Specifications

FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 GENERAL, MECHANICAL/ELECTRICAL
98.04.24
M-6
1174SBM0300A
This copier is equipped with two main drive motors, the PC Drive Motor that drives the
upper half of the copier (Imaging Unit) and the Main Drive Motor which gives drive for the
lower half of the copier (paper take-up/feeding, transport mechanism and Fusing Unit).
Each has its own drive transmitting gears and timing belts as illustrated below.
3 DRIVE SYSTEM
Drive Train for Lower Half of Copier
Coupled to Exit/Duplex
Switching Unit
Paper Exit Roller Drive
Suction Unit
Drive
Upper Fusing
Roller Drive
Main Drive Motor M2
Synchronizing Roller Clutch CL 1
1151M001YB
Paper Transport
Clutch CL 2
Coupled to Paper
Take-Up Unit
Drive Train for Upper
Half of Copier
PC Drum Drive
Imaging Unit
Drive
1139M005AA
PC Drive Motor M1
Drive Train for
Paper Take-Up Unit
<23 cpm Copier>
<15/18 cpm Copier>
Coupled to Copier Gear
Paper Drawer Paper
Take-Up Roll
1142M002AA
Coupled to Copier Gear
1st Drawer Paper
Take-Up Roll
Ver tical
Transport Roller
2nd Drawer Paper
Take-Up Roll
1st Vertical
Transport Roller
2nd Vertical
Transport Roller
1139M004AA