Specifications

FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 MECHANICAL/ELECTRICAL
98.04.24
M-9
ON
PC Drive Motor
ON
Main Erase Lamp
ON
Main Drive Motor
ON
Image Erase Lamp
✽ All LEDs are turned ON.
ON
Developing Bias (High Voltage Unit)
ON
Paper Separator Corona (High Voltage Unit)
ON
Cleaning Bias (High Voltage Unit)
✽ Some models have no Bias Seal installed depending on
their marketing areas.
1st/2nd Drawer Paper Take-Up Solenoid
ON
Synchronizing Roller Clutch ✽For approx 0.2 sec. only
ON
OFF
1st/2nd Drawer Paper Take-Up
Solenoid (2nd Drawer Paper Take-
Up Solenoid: 23 cpm copier only)
PC Drum Charge Corona/Image Transfer Corona
ON
Paper Transport Clutch
ON
Synchronizing Roller Clutch
ON
Start Key ON
Approx. 0.3
Approx. 0.1
Approx. 0.2
Approx. 0.2
Approx. 2.5
D The Start Key is pressed.
ON
1st/2nd Drawer Paper Take-Up Sensor
ON
Transport Roller Sensor
ON
Paper Leading Edge
Detecting Sensor
ON
Exposure Lamp
OFF
Paper
Transport
Clutch
1st/2nd Drawer Paper Take-Up Solenoid ON
(2nd Drawer Paper Take-Up Solenoid: 23 cpm copier only)
Approx. 0.4
Approx. 0.5
Approx. 0.2
Approx. 0.2
1st Drawer:
Approx. 0.7
2nd Drawer:
Approx. 1.4
(23 cpm copier
Only)
E Paper is taken up.
1