Specifications

FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 GENERAL, MECHANICAL/ELECTRICAL
98.04.24
M-54
1174SBM1401A
The Paper Take-Up Rolls are normally in their raised (retracted) position so that they will
not hamper proper loading of paper. When the Start Key is pressed, the Manual Feed
Paper Take-Up Solenoid is deenergized causing the Paper Take-Up Rolls to press the
paper stack downward and take up a sheet of paper.
Paper Stoppers are provided that block the leading edge of the paper stack as it is loaded
on the Table, preventing any portion of the leading edge of the paper from getting inside.
These Stoppers are unlocked at paper take-up, allowing paper into the copier.
Manual Feed Paper Take-Up Clutch controls the turning and stop of the Paper Take-Up
Rolls.
14-1. Paper Take-Up Mechanism
1139M088AA
Rack Gear
Paper Stoppers
Manual Feed
Paper Take-Up
Solenoid SL51
In Standby
Lock Levers Lever
Paper Take-Up
Rolls
At Take-Up
1139M089AA