Specifications

FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 MECHANICAL/ELECTRICAL
98.04.24
M-69
1174SBM2102A
Pressure Springs are installed at both ends of the Lower Fusing Roller. These springs con-
tact the bearings mounted on both ends of the Lower Fusing Roller and exert pressure
through the Lower Fusing Roller to the Upper Fusing Roller which is installed in the Fusing
Unit.
The Fusing Unit is divided into an upper and a lower half, and the upper half can be swung
open. The Upper Half of the copier, when locked in position, presses the upper half of the
Fusing Unit down onto its lower half.
1174SBM2103A
The Cleaning Roller is made up of a core aluminum roller around which a high temperature
resistant paper based material is wound. As well as serving to clean the surface of the
Upper and Lower Fusing Rollers, the Cleaning Roller also ensures that the temperature
along the entire length of the Fusing Rollers does not rise excessively when, for example,
continously feeding small size paper.
21-2. Fusing Rollers Pressure Mechanism
21-3. Cleaning Roller
1139M076AA
Upper Copier Frame
Upper Fusing Roller
Lower Fusing Roller
Pressure Spring
1174M003AA
Upper Fusing Roller
Lower Fusing Roller
Cleaning Roller