Instruction Manual

Multiple Exposure Mode
This mode allows the user to make any number of multiple exposures on a single frame of film.
After loading film in the camera,
turn the Main Switch from
“OFF” to “P” while holding the
“SELF” button down. The
display panel will read “
[N]”
where “N” is the number o
f
exposures taken. The camera
is now in Multiple Exposure
mode. Each time the shutter is
released the left digit (“N”) will
increase by one, but the film is
not advanced. (There is no limit
on the number of times a single
frame can be exposed, but the
indicator advances only up to
“9”.)
★ When the Main Switch is turned
“OFF” the film is advanced to
the next frame and Multiple
Exposure mode is cancelled.