Instruction Manual

Manual Guide Number Setting Mode

In this mode, the user can manually set the desired guide number when using a standard flash unit with hot

shoe, for fully automatic variable aperture synchronized flash exporures that make use of background

lighting as well as flash. (This function is also available in “P” mode with the dedicated flash unit.)

Press the SELECT button and

turn the Main Switch from

“OFF” to “P”.

While holding the SELECT

button down, press the UP o

DOWN buttons until the desired

flash guide number (“P (1.0 -

64)”) appears in the display

panel. When the setting is

completed, the display will read

“PFL”.

★ Turning the Main Switch bac

to “OFF” cancels this mode.

The same guide number can be

reset manually, however, by

simply holding down the

SELECT button while turning

the Main Switch back on.

Note: If the guide number for you

flash unit does not match

the available settings,

choose the next lowest

setting. (Example: If desired

guide number is 24, select

23.)