User`s guide

Replacing the Fuser Oil Roller 27
1
Turn off the printer.
2
Open the printer’s top cover.
3
Rotate the two fuser oil roller lock levers to
release the fuser oil roller.
5"
Dispose of it properly according to your local
regulations.
4
Remove the new fuser oil roller from its
shipping box.
Attention
If you set the new fuser oil roller on a table, do it as shown in
the illustration. Do not allow the roller surface to contact the
table or get dirty. This could lower image quality.
5
Insert the new fuser oil roller
installation guides (front, rear)
into the fuser unit installation
rail.
6
Carefully lower the roller.