User`s guide

Media Types 37
Envelopes
Type
For information about thick stock media recommended for your printer, go to
www.minolta-qms.com/support, then click on Answer Base, or contact Technical
Support. See the
Service & Support Guide
for a complete listing of support
telephone numbers.
Weight
Simplex: 24–43 lb bond (90–163 g/m²)
Autoduplex: Up to 28 lb bond (105 g/m²)
Manual Duplex: 24 lb (90 g/m²) to 43 lb (163 g/m²) bond
Duplexing
Autoduplexing thick stock over 28 lbs (105 g/m²) is not supported. Thicker stock
may be manually duplexed.
Notes
You should test the number of sheets of thick stock the multipurpose tray can hold
to ensure that its performance is acceptable.
43 lb (163 g/m²) bond is also referred to as 90 lb index stock.
Formatting
Your printer receives the instructions to print on envelopes from your application.
„
Print on the front side only. Some parts of the envelope consist of three layers
of paper—the front, back, and flap. Anything printed in these layered regions
may be lost or faded.
„
See your application documentation for specific information on printing
envelopes.
Input Multipurpose
Tray Only
Up to 50, depending on the thickness of the envelopes
Orientation
Face down
Type
Use common office envelopes approved for laser printing with diagonal joints,
sharp folds and edges, and ordinary gummed flaps, such as
„
Commercial #10: Columbian Recycled COR02
„
International DL: Auto Fil #01914
Duplexing
Not supported
Notes
„
You can print
only
on the address side of the envelope.
„
Envelopes should be dry.
„
Do not preload or preseal envelopes.