User`s guide

Clearing Media Jams62
4
Close the right-side cover.
The media jam display is cancelled.
5
Check the release button to make sure the cover is securely closed.
6
If media was removed in step 1, open the multipurpose tray.
7
Shuffle the media that was removed in step 1 and even
up the front edges.
8
Reinsert the media printing face down.
Make sure the media is lying flat and doesn’t exceed
the media limit mark. Check to see if the media width
guides are correct.
Media Jams near the Duplex Unit (Standard on DP Model)
1
Open the top cover.
Attention
Do not pull jammed media from the top of the
printer through the fusing rollers.
This prevents any unfused toner from dirtying
the fuser rollers.