User`s guide

ManualsBrandsMinolta ManualsPrinterMagicolor 2200

Solving Problems with Printing Quality84

Colors are

not register-

ing properly;

colors are

mixed or

have

page-to-page

variation.

The front cover may not be

properly closed.

Make sure that the printer’s front cover is closed.

The OPC drum cartridge is

not correctly seated.

Remove the OPC drum cartridge and reinstall it.

The toner in the cartridges

may need to be redistributed.

Remove the toner cartridges and gently rock them five or

six times to redistribute the toner. Then, reinstall the car-

tridges.

The toner cartridge may be

defective.

Remove the toner cartridge and check for damage. If nec-

essary, replace it.

The media is moist from

humidity.

Remove the moist media and replace it with new, dry

media.

The transfer roller is

misinstalled.

Confirm the proper installation of the transfer roller.

Agfa Screening is not

enabled.

Make sure you have Agfa Screening chosen in the

Administration/Emulations/PostScript/Halftone Type

menu in the driver.

The image is

offset.

The OPC drum cartridge is

defective.

Check the OPC drum cartridge. If necessary, replace the

entire drum kit.

The fuser oil roller is

defective.

Check the fuser oil roller. If necessary, replace it.

The fuser unit is defective. Check the fuser unit. If necessary, replace it.

Colors look

drastically

wrong.

The toner cartridges are

incorrectly installed.

Remove the toner cartridges and reinstall them.

Symptom Cause Solution

ABCDE