User`s guide

Status, Error, and Service Messages90
MAIN UNIT COVER OPEN
The front, top, or duplex covers
are open and must be closed.
Close the specified
cover(s).
MEDIA JAM DUPLEX
Media has jammed in the duplex
area or duplex refeed area on
the models with duplex units
installed.
Locate and remove the
jam.
MEDIA JAM EXIT
Media has jammed between the
print engine and the output tray.
A media jam has been detected
between the fuser and output
tray rollers located near the top
cover.
Exit jams occur in the media
eject area.
MEDIA JAM FUSER
Media has jammed leaving the
fuser area.
MEDIA JAM MAIL BIN
Mail bin jams occur if the media
is jammed in the 5-bin mailbox
on the models with the 5-bin
mailbox installed, between the
printer and the 5-bin mailbox, in
the mailbox eject area, or in the
mailbox transport area.
MEDIA JAM MPT
Media has jammed while being
pulled from the specified multi-
purpose tray.
This message... means... Do this...