User Guide

Engine and Controller Specifications152
Fonts PostScript
—137 resident PostScript fonts that can be scaled from 4
points upward and rotated to any angle in 1° increments; all
typefaces have multilingual character sets
HP PCL 5e, 5c
—80 scalable and 4 bitmapped fonts
PCL XL
—45 scalable and 9 bitmapped typefaces
HP-GL
—40 resident HP-GL symbol sets
Type 1 / Type 3 Support
—Support for Type 1 and Type 3
host-resident downloadable PostScript fonts
TrueType
—Support for Type 42 (PostScript format) host-resident
downloadable TrueType fonts, support for TrueType fonts in PCL
Kanji fonts Hard disk
—MINOLTA-QMS Kanji Internal IDE Hard Disk with 7
Morisawa fonts
Standard
interfaces
CrownNet for Ethernet
—10BaseT/100BaseTX
Parallel
—Centronics/IEEE 1284 bidirectional
Optional
interfaces
Network interface—
Support for one optional network interface
(CrownNet for Ethernet, supporting EtherTalk, LAN Manager/LAN
Server, Netware, and TCP/IP; CrownNet for Token-Ring,
supporting LAN Manager/LAN Server, NetWare, and TCP/IP; or
Crown for DECnet-TCP/IP)
SCSI interface—
Support for up to 3 external SCSI hard disks (up to
2.2 GB)/Jaz drives/Zip drives
RAM Type:
PC-100 Compliant SDRAM DIMMs
N model base system RAM:
64 MB
GN and EN model base system RAM:
128 MB
DP model base system RAM:
256 MB
Total RAM:
Upgradable to 384 MB (through 3 DIMM connectors)
Optional RAM
32, 64, and 128 MB DIMMs
System software
Softloadable; stored in Flash ROM
Internal IDE hard
disk
N and GN models:
Optional, up to 2.2 GB
EN and DP models:
Standard, up to 2.2 GB
5"
For information about hard disks recommended for your
printer, see the magicolor 2200 Answer Base through the
Internet at http://www.qms.com/support/, or contact
Technical Support (see the
Service & Support Guide
for a
complete listing of support telephone numbers).