User Guide

Replacing the OPC Drum, Laser Lens Cover, and Waste Toner Pack 17
3
Support the bottom of the drum with your
hand, then carefully pull the cartridge toward
you and remove it.
5"
Dispose of it properly according to
your local regulations.
Replacing the Laser Lens Cover
1
Press on the laser lens cover lock release lever and
gently pull the laser lens cover toward you.
5"
Dispose of it properly according to your local
regulations.
2
Remove the new laser lens cover from the OPC
drum kit box.
Attention
Do not touch the glass surface of the laser lens.
3
Place the front end of the laser lens cover into
its installation rail.
4
Carefully insert the laser lens cover and
check to make sure it is fully inserted.
Attention
If the laser lens cover is not properly installed, serious damage to the printer
could result.