User Guide

Status, Error, and Service Messages 91
MEDIA JAM OPTIONAL TRAY
Tray jams occur between the
standard upper or optional tray
and the print engine. A misfeed
jam may be as simple as a
sheet of media not being picked,
or it may be that the media was
picked but not fed properly.
Locate and remove the
jam.
The lower feeder unit (optional
on all models except the DP)
door is open.
Close the door.
MEDIA JAM TRANSFER
Transfer jams occur in the trans-
fer roller area. This type of jam
means that the media did not
make it to the paper exit area.
Locate and remove the
jam.
MEDIA JAM UPPER TRAY
Media has jammed while being
pulled from the specified tray.
MEDIA SIZE MISMATCH
The media detected in the tray
doesn’t match the media size
setting.
Change the media in the
tray or change the
media size setting
.
NEW FILE SIZE IN EFFECT
The size of the accounting files
has been increased or
decreased.
Press Select to accept
changes.
NO PRNTREQ ERROR
A printer hardware error has
occurred.
Reboot printer. If mes-
sage continues to
appear, contact your
service provider or Sup-
port. See the
Service &
Suuport Guide
for sup-
port telephone numbers.
ONLINE
The printer is online and ready
to print.
No action needed.
OUTPUT BIN FULL
The media has exceeded the
limit in the specified output bin.
Remove the media from
the specified output bin.
This message... means... Do this...