User Guide

Status, Error, and Service Messages92
PAPER MISMATCH
The media detected in the tray
doesn’t match the media size
setting.
Change the media in the
tray or change the
media size setting
.
PRINTING STATUS
A status page is printing Wait until after the status
page prints, and the
message clears.
PUT <
X > IN INPUT < Y >
The
< X >
specified media is not
in the input tray
<
Y >
.
Refill the tray with the
specified type media.
PUT < SIZE> PAPER IN < BIN>
The Operator Control/Chain
Inputbins is set to Off and the
displayed tray is empty. Refill it
with the specified size media.
<
SIZE>
is the media size
detected by the engine, and
<
BIN>
is the empty tray.
Refill the tray with the
specified size media.
PUT <
TYPE MEDIA> IN INPUT
BIN
Operator Control/Chain Input-
bins is set to On and a chained
tray is empty.
Refill the tray with the
specified type media.
REPLACE <
X >
The specified item
< X >
needs to
be replaced, such as the OPC
drum.
Replace the specified
item.
RESETTING ACCOUNTING
The reset accounting operation
is in process.
No action needed.
WAITING FOR IDLE
An active job is in process.
Access to the menu is not
allowed until the job is finished.
Wait until the print job is
finished and the printer
goes idle.
This message... means... Do this...