Laser Printer Service Manual

5-32 magicolor 330 - Base Engine Service Manual

Primary Fault Isolation Procedures

5.14 - Damaged Prints, continued

Step Actions and Questions Yes No

UPPER EXIT INSPECTION

1. Generate a test print and open the Upper Exit Cover just as the

sheet of paper reaches Exit Roll 3.

2. Inspect the sheet of paper.

Is the sheet of paper undamaged as it nears Exit Roll 3?

Go to step 14 Clean or

replace the

Lower Exit

Assembly

(RRP 9.101)

and the Upper

Exit Assembly

(RRP 9.102)

EXIT ROLL 3 INSPECTION

Is the sheet of paper undamaged until it reaches Exit Roll 3?

Go to Suspect

Components

Replace Exit 3

Roll Assembly

(RRP 9.105)