Installation guide

About the Control Panel
19
English
About the Control Panel
Selecting a Message Window Language
When you receive your printer, the message window language is set to
English. However, status messages and configuration menus can be
displayed in the message window in Czech, Danish, Dutch, English, French,
German, Italian, Japanese (Katakana), Portuguese, and Spanish. Simplified
Chinese, Traditional Chinese, and Korean don’t display in the control panel
message window, but choosing them makes CrownView display in the correct
language.
Selecting a language in the control panel also allows media size selections
to be localized.
If you want to change the message window language, use the following
control panel sequence (slightly dependent upon the installed options):
Press this key . . . (until) the message window displays . . .
Online IDLE (and online LED is off)
Menu CONFIGURATION
OPERATOR CONTROL
Next ( )
CONFIGURATION
ADMINISTRATION
Select ADMINISTRATION
COMMUNICATIONS
Previous ( )
ADMINISTRATION
MISCELLANEOUS
The control panel, located on the top of the printer, allows you to direct the
printer’s operation. In addition, it displays the current status of the printer,
including any condition that needs your attention.
A 2-line, 16-characters/line, message window displays status messages and
configuration information. Status messages are listed in the User’s Guide on
the Documentation CD-ROM.
4 indicators provide printer status information.
8 buttons are used in printer configuration.