Instruction manual

E23
Data Retrieval
E22
Recalling Photographic Data to the Camera Display
A B C
3. Turn the front or rear control dial to select
the data number.
• The following procedure is for the Maxxum/Dynax 7
camera. For other cameras, refer to their cameras’
manuals.
A. By turning the front dial while pressing the AEL button,
you can select dn1-9.
B. Turn the rear dial to move the data numbers by 100.
C.Turn the front dial to change the data number by 1 each
time.
• Film speed will appear whenever a film area is selected
that contains photographic data.
4. Follow the camera’s instructions and recall
the data.
• For the Maxxum/Dynax 7, press the ADJ button on the
control panel.
• The first frame’s data will appear.
5. Select the desired frame whose data you
wish to view.
• For the Maxxum/Dynax 7, slowly turn the front or rear
control dial. For other cameras, refer to their camera’s
manual.
• If the front or rear control dials are moved too quickly,
incorrect data may be displayed.
AB
A,C