Service manual

PagePro 1200 Series Troubleshooting
90
purpose Tray (Paper Take-up Solenoid is energized, causing the Paper Take-up Roller to start
turning) or within about 0.45 sec. to 1.97 sec. (within about 0.9 sec. to 3.94 sec. at 1200 dpi)
after the paper take-up sequence has been started in the Second Paper Cassette Unit.
3. The Paper Take-up Sensor (PS1) is not deactivated within about 1.66 sec. to about 5.25 sec.
(within about 3.32 sec. to 10.5 sec. at 1200 dpi) after the leading edge of the paper has reached
the Paper Take-up Sensor (PS1) (PS1: activated).
4. The Paper Exit Sensor (PS3) is not activated within about 1.79 sec. to about 2.34 sec. (within
about3.58 sec. to 4.68 sec. at 1200 dpi) after the leading edge of the paper has reached the Paper
Take-up Sensor (PS1) (PS1: activated).
5. The Paper Exit Sensor (PS3) is not deactivated within about 1.77 sec. to about 2.39 sec. (within
about 3.54 sec. to 4.78 sec. at 1200 dpi) after the trailing edge of the paper has moved past the
Paper Take-up Sensor (PS1) (PS1: deactivated).
6. The Paper Take-up Sensor (PS1) is in the activated state when the Power Switch (S1) is turned
ON or the cover is closed.
7. The Paper Exit Sensor (PS3) is in the activated state when the Power Switch (S1) is turned ON
or the cover is closed.
(4) How to Reset a Paper Misfeed
Close the Top Cover after the misfed sheet of paper has been cleared.