User`s guide

Paper
2-22
Using the Printer
Chapter 2
Note
• Do not use legal size thick paper (the printer does not support legal size
thick paper).
• Do not use the following types of paper to avoid reduced print quality, a
misfeed or a print failure:
3 Paper already used in a thermal transfer printer or ink jet printer.
3 Paper that is too thin or too thick.
3 Paper folded, curled or torn.
3 Paper having binding holes or perforations.
3 Paper with surfaces that are too smooth or too rough or with varying
surfaces.
3 Paper having special coatings on their surfaces such as carbon paper,
heat-sensitive paper and pressure-sensitive paper.
3 Sheets of various sizes.
3 Paper not cut on right angles.
3 Paper bound by glue, staples or clips.
3 Paper affixed with labels which are easily removed.
3 Post cards that are warped or bent.
• Envelopes should meet the following requirements:
3 Sharp folds and edges.
3 General mailing envelopes without seals on the glued portion.
3 Those having flaps the full width of the envelope (unacceptable if the
flap is glued).
3 Wrinkle-free, no fasteners.
• Generally, envelopes perform well, but some types may wrinkle. We
strongly recommend testing any type of envelope before buying it in
large amounts.
• The Following transparencies are recommended:
3 For color printing, Minolta CF-200 (D) or 3M CG3710
3 For monochrome printing, Minolta M-100 (D) or 3M PP2500
To purchase Minolta transparencies, please contact your local Minolta
dealer, or call 1 (888) 2-MINOLTA (within the U.S.A. only).
• For more information, refer to “Loading Paper”.