Printer User Manual

Outline
8
Pi4700e 8-1
Network Interface Card Chapter 8
8 Network Interface Card
8.1 Outline
The following shows the general outline of this chapter.
G
“Getting ready”
G
“Setting up the network card”
Read the section that covers your particular network environment.
G
“Windows configuration”
G
“NetWare configuration”
G
“Macintosh configuration”
Refer to these sections as required.
G
“Using the utility software”
Read the following sections when necessary.
G
“Troubleshooting”
G
“Jumper switch setting”
G
“Specifications”
8.2 Getting ready
This Network Card is a multi-protocol network card that provides Ethernet
connection for the Minolta Pi4700e printer controller and offers the follow-
ing features.
G
Automatic Ethernet type detection (10BaseT, 100BaseT)
G
Fully transparent AppleTalk printing support for the Macintosh, includ-
ing support for binary PostScript printing.
G
Peer-to-peer printing program allows printing on a network without go-
ing through a server
❍
Peer-to-Peer Printing with TCP/IP (Windows 95/98/Me/NT 4.0)
❍
Peer-to-Peer Printing with IPX/SPX (Windows 95/98/Me)
G
Novell NetWare PSERVER support under bindery base or Novell Di-
rectory Services (NDS)
G
lpr/lpd functions under TCP/IP
G
SNMP control using MIB-II and private MIB
SNMP support using standard MIB on a compatible printer or printer-
specific MIB