User's Guide

106
Check this: Page
• Battery level too low 19
• Battery inserted incorrectly 19
• AC Adaptor attached incorrectly 22
• Battery level too low 19
• Low ambient temperature 109
• Power supply not on. 23
• SD Memory Card or Memory Stick’s
write protected. 13
• Pictures taken have reached the
maximum number.
→ Erase unwanted pictures. 64,70
• Set to the Self-Timer mode. 41
• Flash being charged. 39
• Subject not in the center 34
• Subject hard to focus 34
• Dirty lens 31
• Incorrect distance from the subject 32
• LCD brightness adjusted incorrectly 47,73
• Finger prints or dirt on the monitor 105
• Set to “Flash off” mode 40
- If the following does not solve your problem, please contact the point of
purchase.
Troubleshooting
Symptom
Power will not turn ON
Power turns OFF right
after turning on
Can’t take a picture
even if pressing the
shutter button
Can’t focus
LCD monitor display
and images are not
clear
Doesn’t Flash
Power
Supply
Shooting
the
pictures