Troubleshooting guide

Model Name Program Version Note
bizhub Pro C6500 Print Control G00-25 Use most Current Base Firmware
Image Control G00-25
FD-501 Multifold G00-20
SD-501 Saddle Stitcher G00-20
FS-503 Stapler Control G00-20
FS-607 Stapler Control G00-20
LS-501 Stacker Control G00-20 PostScript language is required.
RU-503/504 Relay Unit G00-20 Need to provide User ID and Password in order
IC-303 Print Controller ver. 1.02 to print from Printgroove POD Queue
IC-304 Print Controller ver.2.0 TBA
IC-408 Print Controller ver.1.01 TBA
** Please see SOLUION ID's: TAUS0902885EN00, TAUS0702782EN01and TAUS1002405EN00 for additional information
Note: Do not install any earlier firmware versions than those listed above.
Page 102 of 126