MINOLTA READER/PRINTERS MOUNTING INSTRUCTIONS & USER’S MANUAL For UC-6 Universal Carrier Step 1 First, remove the zoom lens from the unit.
USER’S MANUAL – Speed Control Functions MOUNTING INSTRUCTIONS Step 1 Step 2 Rotate the carrier base mount 90 degrees as shown in photo at right. ① Speed Control Pad 3 SPEEDS: Slow/Medium/High 90° Rotate GREY BUTTONS Slow Speed *Hold down RED BUTTON and pull handle out to open glass flats to engage High Speed. Step 3 Position the UC-6 Carrier as shown. Pull out the lower base plate of the UC-6 Carrier and pull handle to open glass flat.
USER’S MANUAL – Film Loading Step 5 MOUNTING INSTRUCTIONS Step 5 After lower plate of UC-6 Carrier is in position on the base mount, push the lower plate until it stops. Thread film under the white guide rollers, between the glass flats to the quick take up reel. Step 6 Step 6 Once the UC-6 Carrier is securely attached to the base mount, install zoom lens and plug carrier into unit. The Carrier has two manual knobs which are used to manually advance or rewind the film.
USER’S MANUAL – Film Guide Settings USER’S MANUAL – Film Loading Step 1 Step 3 Adjustable Film Guides PULL OUT for 35mm Setting 35mm setting shown 35MM SETTING TO THREAD FILM: Pull handle to open top glass. Step 4 Step 2 Adjustable Film Guides PUSH IN for 16mm Setting 16mm setting shown 16MM SETTING LOAD FILM ON LEFT SPINDLE: Feed film from over the top of reel.
