Owner's Manual

After the last exposure (No. 36, 24,
20 or 12 on the frame counter,
depending on the film length) you
must rewind the film into its cart-
ridge:
Unfold the rewind crank end with
the light dot (8, in the camera top at
the left), press the rewind release
button (21, in the recess in the
camera base at the right) and let go.
Rewind the film by turning the rewind
crank clockwise.
The film is fully rewound when the
crank starts turning more freely.
After rewinding remove the
camera back and withdraw the cart-
ridge from the camera.
If the frame counter (1) does not
return to its start position on removing
the back, release the shutter once.
However the frame counter automati-
cally resets itself during loading at the
latest when you have pushed the film
end into the take-up spool and ad-
vanced the film and released the shut-
ter before closing the back (see page
22).
Periodically clean the front lens ele-
ment, the outer finder window surfa-
ces and the curved window in front of
the CdS cell. Remove any dust with a
soft brush, air blower or special lens
cleaning tissue - these are obtainable
from photo dealers. Do not use lens
cleaning fluids.
Immediately remove fingerprints
from the front lens; such marks greatly
reduce definition.
When changing film, check that the
back of the lens and the camera inter-
ior are also clean and dust-free.