User Guide

26
E
How to set the flash?
The Flash Mode can only be set under RECORD mode. There are 4 modes available: Auto, Red-
Eye, Fill-In and Off. The default setting is OFF. To change the setting, press the Flash Mode button
a number of times until the desired one is selected.
The setting is conserved even if the camera power is off
Advanced Operation
How to adjust the EV compensation?
To adjust the EV compensation, perform the following:
1. Set the operating mode to RECORD .
2. Press the Menu button. The Record menu appears.
3. Select the EV COMPENSATION item.
4. Select the desired exposure value.
The effective range is from -1.8 to +1.8 in steps of 0.3 EV.
Mode Description
Flash is enabled automatically in low light conditions
Auto Mode with pre-flash to reduce red eye effect
Flash is always enabled
Flash is always disabled
Auto
Red-Eye
Fill-In
Off