User Guide

22
E
combining both near and distant objects.
Note: The setting is reset to Auto if the camera power is off.
LCD Brightness
Changes the brightness setting (-5 ~ +5, Interval =1) of the LCD display.
Press the OK button to select this item. The cursor skips to the data field as the OK
button being pressed. Use the Arrow buttons(
) to increase/decrease the LCD
brightness. Press the OK button again to make the change. The cursor returns to the
Record menu automatically when the change is made.
Note: The setting is conserved even if the camera power is off.
Quickview
If the LCD Monitor is on and Quickview mode is enabled, a preview of the captured
image is shown on the LCD Monitor as soon as the image acquired. When the 3 seconds
are over, the LCD Monitor will return to Record mode with LCD on.