User Guide

23
White Balance
Set the white balance mode.
WHITE BALANCE ICON DESCRIPTION
Auto WB Automatic white balance mode (default)
Daylight Day light mode
Fluorescence Fluorescent light mode
Incandescence Incandescence light mode
1. Set the dial knob to .
2. Press the menu button.
3. Press the or button to select WHITE BALANCE.
4. Press the or button to select the desired white balance setting.
5. Press the menu button to exit from the menu mode.
Photometry
Set the photometry. The camera calculates the exposure level before a photograph is taken.
PHOTOMETRY ICON DESCRIPTION
Center Weighted The exposure is measured and calculated for
the entire area of the screen. By dividing the
entire area of the screen, the exposure level
for each unit is calculated. A well balanced
exposure can be obtained.
Spot The exposure is measured in a very small
area at the center of the screen. It is possible
to calculate the exposure of a subject without
being affected by the surrounding
environment.
1. Set the dial knob to .
2. Press the menu button.
3. Press the or button to select PHOTOMETRY.
4. Press the or button to select the desired photometry setting.
5. Press the menu button to exit from the menu mode.
85939-450-E.p65 2002/11/12, ¤U¤È 01:1423