User Guide

EN-28

White Balance

This sets the white balance for a variety of lighting conditions and permits images to be

captured that approach the conditions that are seen by the human eye.

* [ Blank ] Auto

* [ ] Incandescent

* [ ] Fluorescent 1

* [ ] Fluorescent 2

* [ ] Daylight

* [ ] Cloudy

* [ ] Manual

Manual WB

This manually sets the white balance and stores it. Use of this is convenient when the

white balance does not offer a good match.

Before selecting [Execute] and before taking your image, place a white paper in the

scene and set the white balance manually.

* Cancel / Execute

ISO

This sets the sensitivity for capturing images. When the sensitivity is raised (and the

ISO figure is increased), photography will become possible even in dark locations, but

the more pixelated (grainier) the image will appear.

* Auto / 64 / 100 / 200 / 400 / 800 / 1600

Metering

This sets the metering method for calculating the exposure.

* [

Blank]

Center: Averages the light metered from the entire frame, but gives greater

weight to the subject matter at the center.

* [ ] Spot: A very small portion of the center of the screen is measured to calculate

the correct exposure.

Capture Mode

This sets the recording method at the time of capturing images.

 In [Continuous] and [AEB] capture mode, the [Voice Memo] is automatically fixed at [Off].

Voice Memo

Refer to section in this manual titled "Recording Voice Memos" for further details.

* On / Off

 When [Voice Memo] is set to [On], the [Preview] is also fixed at [On].

* [Blank] Single: Captures one image at a time.

* [ ] Continuous: Permits continuous capture of up to 3 images.

* [AEB] AEB: Permits 3 consecutive images in the order of standard exposure,

underexposure and overexposure compensation.