EC v1 81 Bud-NE | Ste ck Teiiebezeichnung 7 Port name Ted Nr /Fart no / No. Fig.no | qty Designation 7 Designation de piece/ No de pizza 1 1 Sleeve, complete 10500 58000 2 1 Camera back, complete 10500 52000 3 2 Screw, countersunk machine a Bg 1.45 x 2.35mm 30123 4 1 Latch pin 10500 50001 5 1 Pressure spring 35057 6 1 Pressure plate, complete 10500 51000 7 1 Front cap, complete 10500 55000 8 2 Screw, countersunk machine @ Bg 1.45 x 2.
EC Vi 81 Bid-Ne | Stk Teilebezexhnung / Fart name Tendril I Port no / No Fig no | gty Designation / Designation de piece / No de pizza Electronic Components 110 1 Printed circuit board, complete 10500 05000 Ic 1 . Threshold detector 10500 05005 TCA 331 W or similar (1) Threshold detector 36319 TCA 331 W or similar IC 1 . Threshold detector MCC 102 or sim 10800 16110 (1) Threshold detector MCC 102 or sim{ 36221 diode BZX 83 COVE or similar 36376 diode IPD 5,6 or similar 36376 D3 1 .
EC VI 81 DB-Ne | Ste Tetlebezechnung / Part name Teri-Nr /Part no 1 No. Fig.no | qty Designation {I Designation de piece/ No de pie 101 1 Body, welded 10500 01000 102 1 Positive contact 10500 01005 103 1 Tubular rivet 1.5m) 23031 104 1 Negative contact 10500 01015 105 1 Insulating foil 10500 01017 106 2 Contact spring 10500 01016 107 1 Lens, complete 1 5.6 / 15mm 10500 108 1 Setting dial 10500 20901 109 1 Switch unit, complete 10500 08000 110 1 Printed circuit board, complete 10500 05000 111 1 Disc 0.
EC vi 81 Bird-Ne | Sick Teilebezechnung / Part name Tell Nr Part no / No Fig no | qty Designation / Designation de piece /No de pizza 2014 1 Inner plate, complete 10500 24000 202 1 Inner plate, riveted 10500 25000 203 1 Torsion spring 10500 25108 203 1 Transport wheel, complete 10500 26000 205 1 Transport block spring 10400 53007 206 1 Rewind block spring 10400 53008 207 (1) Disc 8.4 4 x 6.85 ยข x 0.05 mm 21033 208 1 Film core retainer 10400 53006 203 1 Screw, filibuster M 2.3 x 3.
EC v1 81 Bud-NR | Ste ck Teilebezechnung {Port name Steiner /Part no { No Fig no | qty Designation / Designation de piece! No de pie 1 Flex, green, 30 mm long 10500 05012 (Printed circuit board switch plate) 212 1 Switch plate, complete 10500 31000 1 .
EC VI 81 MINX EC Testing Programmer 1. Basic Measurement 0 L R, ASA t Remarks 100 under 6 ms, insert A lw 22 400 1-5 2 filters shutter must close 2.
EC vi 81 Lubrication The following lubricant must be used: Molter D paste Lubrication Points: 1. Lens thread (Fig. 107) 2. Smooth surface between set bolt on transport wheel (Fig. 204) and torsion spring (Fig. 203) 3. Smooth surface of the film compensation curve at the frame counter window (Fig.
