Instruction manual

34
Using Minox Classic Camera Flash
with your camera
There is no ash integrated in your camera. If
you wish to shoot images in unfavourable light
conditions (e.g. twilight or in dark areas), you will
require the MINOX Classic Camera Flash which
is optionally available from your Minox dealer or
under
www.minox.com
. The Order number is
69125.
Connect the flash as described in the instructions
enclosed with the flash unit. Pay attention to the
correct seat of the contacts.
Turn on your camera and press the mode button
until you get to the setup menu. Scroll to
Ca-
mera
and press the shutter button. It will take
you to the Camera setting menu. Scroll to
Flash
and press the shutter button again. The flash
menu will show up and you can use up or down
buttons to select
Auto
or
Off
. Select Auto and
press the shutter button again to conrm your
selection.
Press the mode button to go back to Take Photo
mode,
will show on the display screen. Then you
can take a picture as usual.
Note: Once the camera is in the auto flash mode,
the camera will remain in this mode until the camera
is switched off.
Camera
Flash
Quality
Movie
Self Timer
WB
Flash
Auto
Off