User Guide

Changing Lenses
Changing LensesChanging Lenses
Changing Lenses
To remove the lens, hold the camera in
your left hand, pressing the button of the
bayonet lock with the thumb. Grip the
.lens by the focusing ring with your right
hand, as close as possible to the camera
body, and turn anti-clockwise to release
the lens. This can now be lifted out of
the mount. Lenses fitted with an infinity
lock should be locked at infinity before
changing.
A red dot is visible next to the bayonet
lock button. When another lens is to be
inserted, place it in position with the red
dot on the lens mount opposite the red
dot on the camera body. Then secure
the lens by turning it clockwise until the
bayonet lock engages with an audible
click.
Avoid changing lenses .in strong direct
light. Turn your back to the sun, and hold
the camera opening towards your body.
If you keep the camera and lens
separately use a protective cap for each.
Rear caps are available for all LEICA
lenses.
Not For Resale – Free Download at http://homepage.ntlworld.com/joechan/manuals