User Guide

the camera as debscribed on page 27.
Turn the key in the base plate in the
direction marked "auf — open", and lift
off. The film cassette and the take-up
spool are now easily withdrawn. Open
the hinged camera back, and place the
camera in front of you on the table with
the open base upwards, and the lens
facing you.
Hold the take-up spool in the right hand,
and the cassette in the left, both with the
spool knobs pointing up. Now push the
beginning of the film under the clamping
spring of the take-up spool as far as it will
go. The perforated film edge must lie straight
against the spool flange, as shown in the
illustration below.
Next, draw out just enough of the film
leader from the cassette to enable you
to insert the two parts — the cassette
and the take-up spool — into the
camera. The milled spool knobs should
still point upwards and remain visible
while the film slides into the film slot in
front of the open camera back.
Not For Resale – Free Download at http://homepage.ntlworld.com/joechan/manuals