37" LCD HDTV With Built-in DVD Player DTV-373-D OWNER'S MANUAL
IMPORTANT SAFETY PRECAUTIONS • If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.
TABLE OF CONTENTS (FOR TV TUNER) IMPORTANT INFORMATION IMPORTANT SAFETY PRECAUTIONS SUPPLIED ACCESSORIES PREPARATION ● INSERTING BATTERIES INTO THE REMOTE CONTROL ● USING THE REMOTE CONTROL UNIT ● CAUTIONS REGARDING REMOTE CONTROL UNIT DISPLAY ● FRONT VIEW ● REAR VIEW REMOTE CONTROL CONNECTIONS BASIC OPERATIONS ● TURNING ON THE POWER ● TURNING OFF THE POWER ● SIGNAL INPUT SELECTION WATCHING TV ● TURNING ON THE POWER ● TURNING OFF THE POWER ● SIMPLE BUTTON OPERATIONS FOR CHANGING CHANNELS ● USING FLASHBACK O
TABLE OF CONTENTS (FOR DVD PLAYER) BASIC OPERATIONS ● PLAY DISCS ● PAUSE ● OSD ● VOLUME CONTROL ● DVD MENU PLAY ● SELECT WITH NUMBER BUTTONS PLAY DISCS IN VARIOUS WAYS ● AUDIO MODE ● MUTE ● FAST PLAY ● REPEAT PLAY ● ZOOM PLAY ● SELECT SUBTITLES ● PROGRAM PLAY ● SHUFFLE (RANDOM) PLAY MENU SETTING ● GENERAL SETUP ● AUDIO SETUP ● PASSWORD SETUP ● PREFERENCES DIGITAL CARD PLAY OPERATION TROUBLESHOOTING TECHNICAL SPECIFICATIONS 31-35 31 31 31-34 34 34 35 35-39 35 35 36 36 37 37 38 39 40-44 41-42 42-43 43 44 45
IMPORTANT INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated ''dangerous voltage'' within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
IMPORTANT SAFETY PRECAUTIONS The present set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in the present unit will protect you if you observe the following procedures in installing, using and servicing. The present unit is fully transistorized and does not contain any element that can be repaired by the user. 1.
IMPORTANT SAFETY PRECAUTIONS f) When the product displays an abnormal condition. Any noticeable abnormality in the product indicates that the product needs servicing. 12. Replacement parts - In case the product needs replacement parts, make sure that the service person uses replacement parts specified by the manufacturer, or those with the same characteristics and performance as the original parts. Use of unauthorized parts can result in fire, electric shock and/or other danger. 13.
SUPPLIED ACCESSORIES Make sure the following accessories are provided with the product. Component Video Cable or Y/Pb/Pr cable AV cables TV/DVD EPG TV VIDEO P.MODE 1 37" LCD HDTV S.
PREPARATION INSERTING BATTERIES INTO THE REMOTE CONTROL Insert supplied batteries via the battery compartment on the back of the remote control. Make sure polarity matches the (+) and (-) marks inside the compartment. USING THE REMOTE CONTROL UNIT ● ● ● TV/DVD EPG TV VIDEO P.MODE S.MODE 1 2 3 4 5 6 Use the remote control by pointing it towards the remote sensor on the TV. Objects between the remote control and the sensor may disrupt operation.
DISPLAY FRONT VIEW 1 SD/MMC/MS DVD/CARD 2 3 4 PREV 5 NEXT DISC IN 6 STOP 7 8 PLAY/ PAUSE REPEAT 9 EJECT SOURCE MENU 10 11 CH CH 12 VOL VOL 13 16 15 ON/OFF 14 1) MULTI MEDIA CARD/SD/MEMORY STICK CARD SLOT 2) DISC SLOT: Insert a DVD or CD disc to play under DVD status. In other status, insert a disc to change to DVD status. 3) DVD/CARD: In DVD mode, use to shift between DVD and CARD. In other mode, press to change to DVD mode directly. 4) PREV: Use to skip to the previous chapter.
DISPLAY REAR VIEW S-VIDEO2 L R AUDIO VIDEO AV2 INPUT Y CB / PB R L C R / PR AUDIO VIDEO L ANT.
REMOTE CONTROL 1 2 3 TV/DVD EPG TV VIDEO P.MODE S.MODE 1 2 3 4 5 6 7 8 9 35 34 33 32 10/0 +10 4 5 FAVORITE VOL CH CC 31 MTS/SAP 30 6 MUTE TV MENU FLASHBACK 7 8 9 10 OK DVD TITLE DVD MENU /USB/CARD STOP 11 12 13 14 15 16 17 29 28 DVD PREV NEXT ZOOM SETUP FR FF AUDIO REPEAT OSD EJECT PLAY MODE SUBTITLE VIEW MODE 27 26 25 24 23 22 21 20 19 18 RC-600 1) POWER: Use to turn the unit on and off. 2) EPG: Use to bring up the EPG menu.
REMOTE CONTROL 8) Cursor Buttons ( , , , ): Use to select a desired item on the setting screen. And move the picture on the screen. 9) OK: Use to confirm your selections. 10) DVD TITLE: Use to bring up the DVD title menu. 11) STOP: Use to stop the DVD playback. 12) : Press to skip to the previous chapter or track. 13) : Press to skip to the next chapter or track. 14) : Press to play in fast backward. 15) :Press to play in fast forward. 16) PLAY MODE: Use to shift DVD play mode.
CONNECTIONS S-VIDEO2 L R AUDIO VIDEO AV2 INPUT Y CB / PB C R / PR AUDIO VIDEO L ANT.
CONNECTIONS SYSTEM CONNECTIONS a. Using the antenna input: Connect the antenna terminal from an antenna or cable/satellite receiver to the antenna input terminal on the DTV-373-D; use the VIDEO button and the / buttons to set the DTV-373-D's signal source to "Digital TV" or “Analog TV”. b.
BASIC OPERATIONS POWER VIDEO TV/DVD EPG TV SOURCE SOURCE P.MODE VIDEO S.MODE MENU CH 1 2 3 4 5 6 7 8 9 CH +10 VOL FAVORITE VOL ON/OFF 10/0 POWER VOL CC CH MTS/SAP MUTE TV MENU FLASHBACK TURN ON THE POWER 1. Press POWER button on the front panel to turn on the TV set. The POWER indicator lights up green. 2. If the STANDBY indicator still lights up red, press POWER on the remote control to turn the TV set on. TURN OFF THE POWER 1.
WATCHING TV TURN ON THE POWER 1. Press POWER button on the front panel to turn on the TV set. The POWER indicator lights up green. 2. If the STANDBY indicator still lights up red, press POWER on the remote control to turn the TV set on. TURN OFF THE POWER 1. Press POWER on the remote control, the image on the screen disappears and the STANDBY indicator lights up red. NOTE: Weak electric power is still consumed even when the power is turned off.
WATCHING TV Using number buttons on the remote unit P.MODE S.MODE 1 2 3 4 5 6 7 8 9 10/0 +10 NUMBER BUTTONS FAVORITE VOL CC CH MTS/SAP MUTE TV MENU FLASHBACK OK Select the channels directly by pressing the number buttons. EXAMPLE: To select a 1-digit channel (e.g. channel 2): Press 2 . To select a 2-digit channel (e.g. channel 12): ● Press 1 ,followed by 2 . ● USING FLASHBACK ON THE REMOTE UNIT P.MODE 1 S.
WATCHING TV SIMPLE BUTTON OPERATION FOR CHANGING VOLUME/SOUND Changing the volume You can change the volume by pressing VOL +/- button. P.MODE SOURCE S.
WATCHING TV Setting MTS/SAP stereo mode The System has a feature that allows reception of sound other than the main audio for the program. This feature is called Multi-channel Television Sound (MTS). The System with MTS can receive mono sound, stereo sound and Secondary Audio Programs (SAP). The SAP feature allows a TV station to broadcast other information, which could be audio in another language or something completely different like weather information.
BASIC ADJUSTMENT SETTINGS VIDEO MENU You can get the satisfied picture by adjusting the following Video menu. Press the VIEDO button to select various signal modes. Press the TV MENU button to enter LCD menu. Press / to select "VIDEO MENU", and then press OK or to enter "Video" menu. Brightness 1. Press / to select "Brightness" in "Video" menu. 2. Press OK to enter the Brightness menu. 3. Press / to adjust the brightness; press OK to return to the "Video" menu. 4. Press TV MENU to exit. Contrast 1.
BASIC ADJUSTMENT SETTINGS VIDEO MENU(CONTINUED) Temperature Mode 1. Press / to select "Temperature Mode" in "Video" menu. 2. Press / to select a Temperature Mode among: Cool, Normal, Warm, and User. When "User" is selected, the screen shows: 3. Press / to select "Temperature (R)", "Temperature (G)", "Temperature (B)", and press adjust. 4. Press TV MENU to exit.
BASIC ADJUSTMENT SETTINGS AUDIO MENU Adjust the quality of the sound through the following Audio menu. Press the VIDEO button to select various signal modes. Press the TV MENU button to enter LCD menu. Press / to select "AUDIO MENU", and then press OK or to enter "Audio" menu. Treble 1. Press / to select "Treble" in "Audio" menu. 2. Press / to adjust the treble. 3. Press TV MENU to exit. Bass 1. Press / to select "Bass" in "Audio" menu. 2. Press / to adjust the bass. 3. Press TV MENU to exit. Balance 1.
BASIC ADJUSTMENT SETTINGS SCREEN MENU Use to adjust display mode of the playback picture. Press the VIDEO button to select various signal modes. Press the TV MENU button to enter LCD menu. Press / to select "SCREEN MENU", and then press OK or to enter "Screen" menu. Horizontal Position 1. Press / to select "Horizontal Position" in "Screen" menu. 2. Press OK to enter the Horizontal Position menu. 3. Press / to adjust the horizontal position of the playback picture. 4.
BASIC ADJUSTMENT SETTINGS CHANNEL MENU (ONLY DIGITAL TV & ANALOG TV MODE) 1. Press the TV MENU button to enter LCD menu. 2. Press / to select "CHANNEL MENU", and then press OK or to enter "Channel" menu. Favorite Channel 1. Press / to select "Favorite Channel" in "Channel" menu. 2. Press / to select the favorite channel number in ANALOG and DIGITAL. 3. Press OK to put the current channel into favorite list. 4. Press TV MENU to exit. Example: 1.
BASIC ADJUSTMENT SETTINGS CHANNEL MENU (CONTINUED) Air/Cable 1. Press / to select "Air/Cable" in "Channel" menu. 2. Press / to shift between Air and Cable. 3. Press TV MENU to exit. Auto Scan 1. Press / to select "Auto Scan" in "Channel" menu. 2. Press OK to activate auto scan. 3. This unit will search and memorize all channels viewable automatically in your area. 4. The unit will skip to the first channel to play when the auto search ends.
BASIC ADJUSTMENT SETTINGS SETUP MENU 1. Press the TV MENU button to enter LCD menu. 2. Press / to select "SETUP MENU", and then press OK or to enter "Setup" menu. Language 1. Press / to select "Language" in "Setup" menu. 2. Press / to select a language. 3. Press TV MENU to exit. Sleep 1. Press / to select "Sleep" in "Setup" menu. 2. Press / to set the sleep time among: Off, 15Mins, 30Mins, 45Mins, 60Mins, 90Mins, and 120Mins. 3. Press TV MENU to exit. Menu Transparency 1.
BASIC ADJUSTMENT SETTINGS CLOSED CAPTION MENU Your system is equipped with an internal closed caption decoder; closed caption is the system that allows you to view conversations, narration, and sound effects in TV programs and home videos as subtitles on your display. Only in Digital TV, Analog TV, Composite and S-Video mode, there is Closed Caption menu. 1. Press the TV MENU button to enter LCD menu. 2. Press / to select "CLOSED CAPTION MENU", and then press OK or to enter "Closed Caption" menu.
BASIC ADJUSTMENT SETTINGS CLOSED CAPTION MENU (CONTINUED) Font Style 1. Press / to select "Font Style" in "Closed Caption" menu. 2. Press / to select a font style among: Default, Style1, Style2, Style3, Style4, Style5, Style6 and Style7. 3. Press TV MENU to exit. Foreground Color 1. Press / to select "Foreground Color" in "Closed Caption" menu. 2. Press / to select a foreground color among: Default, Black, Green, Blue, Red, Purple, Orange, and Yellow. 3. Press TV MENU to exit. Background Color 1.
BASIC ADJUSTMENT SETTINGS PARENTAL MENU Only in Digital TV, Analog TV, Composite and S-Video mode, there is Parental menu. 1. Press the TV MENU button to enter LCD menu. 2. Press / to select "PARENTAL MENU", and then press OK or to enter "Parental" menu. The password menu displays. 3. Enter the password with number buttons, and press OK to confirm. (The factory password is 9999.
BASIC ADJUSTMENT SETTINGS PARENTAL MENU (CONTINUED) Change Password 1. Press / to select "Change Password" in "Parental" menu. 2. Press OK to display the Change Password menu. 3. Enter your new password with numbers, then input it again and press OK to confirm. 4. Press TV MENU to exit. MPAA (Movie Rating) 1. Press / to select "MPAA" in "Parental" menu. 2. Press OK to display the MPAA menu. 3. Press / to select desired MPAA position and press OK to confirm. 4. Press TV MENU to exit.
BASIC ADJUSTMENT SETTINGS PARENTAL MENU (CONTINUED) TV Guidelines 1. Press / to select "TV Guidelines" in "Parental" menu. 2. Press OK to display the TV Guidelines menu. 3. Press / to select desired US-TV position and press OK to confirm. When setting an individual content-based rating items, do as follows: ①Press to access block content items from the currently selected age-based rating item. ②Press / to select an individual item, and then press OK to confirm. Repeat the same step for other items.
TROUBLESHOOTING Please check the following items before asking for repair service. Symptom Neither picture nor sound. Picture is OK, but no sound. Sound is OK, but no color. Check Items - Check the contact of sockets is all right. - Check the TV main power is on. The picture is overlapped image. -Check the antenna is installed correctly and if not, adjust the antenna toward the broadcasting station. Picture has ''snow noise ''.
TECHNICAL SPECIFICATIONS 37'' WIDE LCD PANEL RESOLUTION 1366 X 768 VIEWING ANGLE (H/V) LCD CONTRAST RATIO BRIGHTNESS (cd/m2) EFFECTIVE PIXEL RATE DIMENSION 500 MORE THAN 99.99% 947 X 724 X 300 mm WITH STAND (37.3 X 28.5 X 11.8 inch) WITHOUT STAND 24.2Kg (53.36 lbs) WITH STAND 29.7Kg (65.49 lbs) TV STANDARD TV-FUNCTION 800:1 947 X 665 X 99 mm (37.3 X 26.2 X 3.
BASIC OPERATIONS (FOR DVD PLAYER) Play Discs DVD Pause 、 CD DVD 、 CD Press 1. Press POWER to turn on the unit. 2. P r e s s t h e D V D b u t t o n o n t h e r e m o t e control to enter DVD status. 3. I n s e r t a d i s c i n t o t h e d i s c s l o t , w i t h t h e label side facing to yourself. 4. The unit begins to read the disc. 5. Press (PLAY) to play the disc.
BASIC OPERATIONS (FOR DVD PLAYER) Remember, you can only access the Display when you're 2. Press the or buttons to highlight the Chapter icon. playing a disc. Also, the Display features are only 3. Press the or buttons to go to the previous or next available if the disc was created with that particular chapter. feature (i.e.
BASIC OPERATIONS (FOR DVD PLAYER) 1. When the disc is playing, press OSD on the remote to bring up the Display. 2. Press the or buttons to highlight the Subtitle icon. 3. Press the or buttons to scroll through the subtitle ● All - repeats the disc that is playing ● Title - repeats the title that is playing Chapter - repeats the chapter that is playing To Use Repeat: 1. While a disc is playing, press OSD on the remote to bring up the Display. 2. Highlight the Repeat icon. 3.
BASIC OPERATIONS (FOR DVD PLAYER) DVD Menu Play To Use Repeat: 1. While a disc is playing, press OSD on the remote to bring up the Display. 2. Highlight the Repeat icon. 3. Press the or buttons to scroll through the Repeat options until the Repeat option you want is displayed in the text box. 4. The selected repeat option will loop repeatedly until you turn Repeat off. Some DVDs have title menus and chapter menus. Press (PLAY), the screen shows the menu. Press or to skip to the next or previous page.
BASIC OPERATIONS Select with Number Buttons PLAY DISCS IN VARIOUS WAYS Audio Mode ● CD DVD 、 CD You may select a language from a multi-language DVD. OK DVD TITLE Load a disc. Press number buttons to select tracks after the unit finishes reading the disc. DVD MENU /USB/CARD STOP DVD PREV NEXT ZOOM SETUP FR FF AUDIO REPEAT PLAY MODE SUBTITLE 1. If the track number isn't over 10, just push buttons 1-10. Example: push 8 to select track 8.
PLAY DISCS IN VARIOUS WAYS Fast Play DVD Repeat Play 、 CD DVD OR CD OK DVD TITLE DVD MENU /USB/CARD STOP to play in fast-forward DVD mode. Each time you press the button, the screen shows PREV NEXT ZOOM SETUP FR FF AUDIO REPEAT PLAY MODE SUBTITLE the following in order: FF 、 CD This function can be used to repeatedly play a title, chapter, track, or a whole disc. When playing a disc, you can play it in fast-forward or fast-reverse mode to find what you want to view. 1.
PLAY DISCS IN VARIOUS WAYS REPEAT Select Subtitles TRACK DVD 2. To repeat a disc: Press REPEAT , the screen shows " The unit plays all the tracks on the disc. This operation works only with discs with multiple subtitle languages recorded. ALL". REPEAT OK ALL DVD TITLE DVD MENU /USB/CARD STOP DVD PREV NEXT ZOOM SETUP FR FF AUDIO REPEAT PLAY MODE SUBTITLE OSD 3. To remove "REPEAT" function: Press REPEAT till " ALL" disappears.
PLAY DISCS IN VARIOUS WAYS Program Play DVD CD CD 1. Press P.MODE until the screen shows: /USB/CARD STOP DVD PREV NEXT ZOOM SETUP FR FF AUDIO REPEAT OSD EJECT PLAY MODE SUBTITLE PLAY MODE PROGRAM: TRACK 01 _ _ 02 _ _ 03 _ _ 04 _ _ 05 _ _ EXIT VIEW MODE RC-600 To use the program playback feature, you must enter the order in which you want the titles (and chapters) on the DVD or the tracks on the CD to play by creating a program. 2.
PLAY DISCS IN VARIOUS WAYS Shuffle (Random) Play DVD CD The unit can play DVD chapters or audio tracks in random order. The order is different each time. 1. Press PLAY MODE to select shuffle or random play mode when a disc is playing. PLAY MODE The screen shows: SHUFFLE OR RANDOM 2. Shuffle or random play will begin. 3. Remove shuffle or random play. ● When playing a DVD disc, press ■ twice. ● When playing a CD disc, press ■ twice.
MENU SETTING According to the recorded information and external equipment, set the following functions for the player to obtain the best playing status. The screen shows: -- Audio Setup Page -OK DVD TITLE Speaker Setup DVD MENU Dolby Digital Setup /USB/CARD STOP DVD PREV NEXT ZOOM SETUP FR FF AUDIO REPEAT PLAY MODE SUBTITLE OSD Channel Equalizer SETUP 3D Processing EJECT Main Page VIEW MODE Go To Speaker Setup Page RC-600 1.Press SETUP to set options in the main menu.
MENU SETTING Press (PLAY) to confirm your selection. Set "Dual Mono" in "Dolby Digital Setup" to "Left Mono". The sereen shows: ● -- General Setup Page -TV Display Wide Normal/PS Normal/LB Wide OSD Lang ENG English French Spanish Captions On On Off Screen Save On On Off Last Memory On On Off Main Page --Dolby Digital Setup-Dual Mono L Stereo Left Mono Right Mono Mixed Mono D.R.C Audio Setup ■ TV DISPLAY 1. NORMAL/PS This is selected when the unit is connected to a normal TV.
MENU SETTING ■ OSD LANGUAGE ● ● ● Lt/Rt A disc recorded multi channel soundtrack, the output signal will be incorported to left and right channel. STEREO A disc recorded multi channel soundtrack, the output signal will be incorported to stereo. ● ENGLISH The OSD is in English. FRENCH The OSD is in French. SPANISH The OSD is in Spanish. ● ■ DOLBY DIGITAL SETUP ■ CAPTIONS The setting structure is: ON Subtitles are shown. OFF Subtitles are hidden.
MENU SETTING Password Setup ■ 3D PROCESSING The setting structure is: The setting structure is : - - 3D Processing Page - V SURR Reverb Mode - - Password Setup Page - PW Mode Off On Off Password Change Main Page Off On Off Off Off Concert Living Room Hall Bathroom Cave Arena Church ■ PASSWORD MODE ● ON: The password function is on and "PARENTAL" is dim and cannot be selected. ● Audio Setup OFF: The password is locked, "PARENTAL" can be selected.
MENU SETTING Preferences The setting structure is : - - Preference Page - Audio ENG Subtitle ENG Disc Menu Parental Default English French Spanish Chinese Japanese English French Spanish Chinese Japanese Off ENG 08 English French Spanish Chinese Japanese 1 2 3 4 5 6 7 8 KID G PG PG 13 PGR R NC17 ADULT Reset Main Page ■ LANGUAGE SELECTION If a language mentioned above is recorded on the disc, you can select sound, subtitles or disc menu languages.
MEMORY CARD PLAY OPERATION MEMORY CARD (MMC/SD /Memory Stick card ) can memory MP3 songs and digital pictures . How to select MEMORY CARD to play 1. Turn on the power. 2. Insert MMC/SD/Memory Stick card to the "3 in 1 DIGITAL CARD" Slot. NOTE: Insert the digital card with the label side downwards. DIGITAL CARD MMC/SD /Memory Stick card SD/MMC/MS DVD/CARD PREV NEXT DISC IN STOP PLAY/ PAUSE REPEAT EJECT 3. Press VIDEO to select " DVD/Card" mode . 4.
TROUBLESHOOTING If you experience the following problems while using the unit, this troubleshooting guide can help you. No sound ● ● ● Check if the unit is connected securely. Make sure the TV or amplifier is working properly. Make sure the amplifier is set to receive DVD signal output. Disc cannot be played ● ● ● ● No image ● ● ● Check if the unit is connected securely. Make sure the TV is working properly. Make sure the color system is set correctly.
TECHNICAL SPECIFICATIONS Laser Video system Frequency response Signal/noise ratio Wavelength 650nm NTSC 20Hz ~ 20KHz±2.5dB ≥80dB Audio distortion + noise ≤- 60dB (1KHz) Channel separation ≥80dB ( 1KHz) Dynamic range ≥80dB ( 1KHz) Audio out (analog audio) Output output level: +0.2V 2V -0.
