OWNER’S MANUAL HL40XSL2/HL40XSLW2/ HL46XSL2/HL46XSLW2 LED HDTV 01 0090509595 Please READ this manual carefully before operating your TV, and retain it for future reference.
Warning CAUTION RISK ELECTRIC SHOCK DO NOT OPEN CAUTION: ! TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
Safety Instructions FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rule. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, use and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Safety Instructions SAVE THESE INSTRUCTIONS Thank you for purchasing the Haier product. This easy-to-use manual will guide you in getting the best use of your product. Remember to record the model and serial number. They are on label in back of the unit. Model number serial number Date of purchase Staple your receipt to your manual. You will need it to obtain warranty service.
Contents Contents Warning 1 Safety Instructions 3 Introduction 5 Controls ................................................................ 5 Connection Options ............................................ 6 Universal Remote control ................................... 7 How to Customize your own audio status ................ 17 SAP Broadcasts Setup....................................................... 18 Function menu...................................................18 Menu Language...............
Introduction Introduction Controls This is a simplified representation of the TV front panel, side panel control buttons and side inputs. TV Side panel controls and connections MENU INPUT VOL CH 1 MENU 2 INPUT 3 VOL +/4 CH +/5 POWER 6 Remote Sensor Menu display. Press to access the on-screen menu display. Press to access the input source mode. Press repeatedly to change the source to the one you want to watch. In the MENU screen, the INPUT button serves as the ENTER button.
Introduction Connection Options Pb Y L R VIDEO L R AUDIO AV IN Y Pb Pr L R AUDIO COMPONENT 2 IN PC PC/DVI AUDIO PC IN HDMI 4 IN HDMI 3 IN HDMI 2 IN AUDIO OUT HDMI 1 IN L R AUDIO COMPONENT 1 IN Pr DIGITAL AUDIO OUT (OPTICAL) ANT IN USB Back panel connections 1 AUDIO Out Connect the audio L/R cables to your audio equipment. 8 COMPONENT Connect the audio L/R cables from the component video signal source to these jacks.
Introduction Universal Remote control The remote control cannot be operated unless the batteries are properly loaded. When using the remote control, aim it at the remote sensor on the TV. Function introduction 1 POWER TV DVD SETBOX CABLE 2 VCR AUD 3 PICTURE Press to turn on and off the TV. To select one of the system modes in which the remote control can be used. Press repeatedly to cycle through the available picture modes. 4 AUDIO Press to cycle through different sound settings.
Installation Installation External Equipment Connections Accessories '9' 79 67% 3,&785( &$%/( $8',2 9&5 $8' 3& +'0, ,1387 087( 5(&$// 92/ &+ 0(18 (;,7 (17(5 6 /( ( 3 86% ' ,6 3 / $ < 3/$< 3$86( 6723 5(3($7 076 6$3 )5((=( *8,'( &&' 5(9 35(9 $5& 5(& 1(;7 &+ /,67 )$925,7( Remote control Alkaline battery (AAA) x 2 Owner’s manual Antenna Connection Over-the-air TV reception quality will depend on your antenna type, antenna location and antenna positioning.
Installation Choose Your Connection How to connect There are several ways to connect your television, depending on the components you want to connect and the quality of the signal you want to achieve. The following are examples of some different ways to connect your TV with different input sources. Connecting a VCR q Connect the audio and video cables from the external equipment’s output jacks to the TV input jacks, as shown in the figure.
Installation B Component video device Use INPUT on the remote control to select COMPONENT, VGA or HDMI source.
Installation output analog and digital RGB simultaneously, connect only one of either VGA IN or HDMI IN to display the VGA on the TV. q If the graphic card on the computer does output analog and digital RGB simultaneously, set the TV to either VGA or HDMI; (the other mode is set to Plug and Play automatically by the TV.) C Y Resolution Then, make the corresponding audio connection. If using a sound card, adjust the VGA sound as required.
Installation How To Use q If the source device supports Auto DVI function, the output resolution of the source device will be automatically set to 1280s720 p. q If the source device does not support Auto DVI, you need to set the output resolution appropriately. To get the best picture quality, adjust the output resolution of the source device to 1280s720 p. q Press the INPUT button to select HDMI input source in input source option of Select Main source menu.
Operation Operation Video Language English OSD Timeout OSD Transparency Audio DPMS Channel Blue Screen DCR Function Time Setup In the manual, the OSD (on screen display) may be different from your TV’s, because it is just an example to help you with the TV operation. There are several options you might need to set up in order for your TV to work properly. Read the instructions that follow. Initial Setup: Set according to the screen display.
Operation Video Audio Channel Video Antenna Audio Channel On Function Function Lock Lock Channel E Tuner Mode Channel Scan Channel Skip Channel Labels Time Shifting Mode / Channel Skip Select EXIT Back Press / ENTER button to start searching. Video Audio Status: Scanning...
Operation 2.Playback status: It shows the playback status (Play, Pause, Fast Forward, Rewind). Play number decreasing direction. Note Fast forward Pause Fast reverse 3.Playback speed: playback speed can be changed 1x,2x,4x,8x,16x,32x. 4.Playback position: The playback position is always at the center of the time bar. 5.Time scale:shows the time in half hour increments. Note R Time Shift function is only available in DTV mode.
Operation R Only when the item of mode is custom, the Brightness, Contrast, Color, Tint, Sharpness and Color Temperature can be set by user. In other mode the value of them are preset. select Video menu. / B Press / ENTER button and then use button to select Mode. C Press / button to select the option Standard, Vivid, Custom and Mild. Y Color temperature This will increase or decrease Warm (red) and Cool (blue) colors to suit personal preferences.
Operation C PC Set Press / ENTER button and then use / button to adjust the setting. When you select the PC input, this function is used. Adjustment for screen Position, Clock, Phase, Setting Display adjust menu by pressing INPUT button then use / button to select the source of PC item. Audio menu Y Auto sync: How to select audio mode Automatically adjust display of the picture (Only available in PC source).
Operation Adjust to increase or decrease lower-pitched sounds. B Press EXIT button to save and return to TV viewing. Y Treble Adjust to increase or decrease higher-pitched sounds. Function menu Y SRS TS XT To turn the simulated surround sound on and off. Menu Language Y Equalizer To adjust the equalizer: Off, Rock, Pop, Live, Dance, Techno, Classic and Soft. Y Speaker: To adjust the speaker on or off.
Operation DPMS Video Audio PC Power Management. When set On, the set will be put in standby mode automatically if there is no signal received for 2 minutes. Auto On Date 2009/01/01 Time 11:54 AM Channel Timer Off On Time Function Off Time Lock 11:54 AM 12:00 AM Note R DPMS is useful only in VGA source. Date/Time Press MENU button and then use select Function menu. / button to / button B Press / ENTER button and then use to select Blue Screen. C Press / button to select On or Off.
Operation the Closed Caption options. It helps the hearing impaired with the broadcast program, as well as helping children learn how to read. A built in decoder displays the audio portion of a program as text on the screen when this option is selected. Video Audio Caption Style Custom Font Size Large Font Style Font Color Style 1 White Solid Background Color Black Background Color: To adjust the background color: Black, White, Green, Blue, Red, Cyan, Yellow and Magenta.
Operation TV-14 (Parents strongly cautioned) V (Violence) (applies to TV-PG, TV-14, TV-MA) TV-MA (Mature audience only) FV (Fantasy Violence) (applies to TV-Y7) Ratings for Movies previously shown in theaters: Lock setup MPAA Rating: G (General audience) PG (Parental guidance suggested) PG-13 (Parents strongly cautioned) R (Restricted) NC-17 (No one 17 and under admitted) X (Adult only) Set up blocking schemes to block specific channels, ratings, and external viewing sources.
Operation C Press / button to select the item, press OK button to set. R The sub-ratings (A, D, L, S, V, FV) work together similarly. Y How to set the A, D, L, S, V and FV sub-ratings Video Audio Channel Function Lock Channel Block 10-1 11 11-1 12 13 14 14-1 14-2 14-3 15 Digital Analog Digital Analog Analog Analog Digital Digital Digital Analog q First, press / button select one of these Ratings: TV-Y, TV-Y7, TV-G, TV-PG, TV-14, or TV-MA, and press / button.
Operation C Press ENTER button to confirm. Video Note R If there is any lock mark on the top of the set such as channel lock, parental lock and so on, you can press OK to resume it .( Press OK to display password menu and input your password.) C C8+ G PG 14+ 18+ Audio Channel Function Other Functions Lock Allowed Rating CA Eng Rating ENTER Set Blocked Rating / Select EXIT Back Brief Info CA Fren Rating Y Canadian French Language Rating A B C / button to select CA Fren Rating Press item.
Operation R Program information in the guide is provided by the broadcasters. As a result, it may sometimes include only the channel number, without a program title or description. audio portion of a television program into written words which then appear as subtitles on the television screen. Closed captions allow viewers to read the dialogue and narration of television programs. A Using Closed Captions q Captions are the subtitles of the dialogue and narration of television programs.
Operation R The captions do not always use correct spelling and grammar. Not all TV programs and product commercials are made for broadcast with Closed Caption information included. Refer to your area’s TV program listings for the TV channels and times of Closed Caption shows. The captioned programs are usually noted in the TV listings with service marks such as “CC” . D Press EXIT button on the remote to return to the previous menu.
Operation 1. Play Time 2. File Name 3. Repeat D 1. Play/Pause 2. Repeat 3. Shuffle E 4. 5. 6. Press MENU button to display the option list. Duration Effect Information Press the button on the remote control to select the adjusted item, press ENTER button to confirm. USB REV PLAY/PAUSE STOP REC PREV NEXT 1 2 1. Play previous picture 2. Play next picture REPEAT F 4. Shuffle On or Off 5. Audio Only 6. Information 1. Play/Pause 2. Repeat 3.
Universal Remote Control Video. C Press / / / button to select desired video folder, and then press ENTER button to enter the play interface. Universal Remote Control Setting Up Your Remote Control After it has been set up properly, your remote control can operate in six different modes: TV, DVD, VCR, SETBOX, CABLE or AUDIO. Note R The remote control might not be compatible with all DVD Players, VCRs and Cable boxes. 1. Play Time 2. File Name 3. Repeat D 4. Shuffle On or Off 5. Audio Only 6.
Universal Remote Control D If user's input is incorrect, LED will blink 6 times in 3 seconds (2 HZ). And then keep 2 HZ blink, user now can return to step 3 and re-program the device. Within 30 seconds, user should enter the 3-digit brand code corresponding to your device. If time out or any key other than Power and digits is pressed, LED will be off and manually programming process is exit.
Universal Remote Control F G Press digit 3 key to get the third digit of current codeset. Blink Freq is 1 HZ. Only digit 1, 2, 3 are valid in this mode. And the sequence is not fixed. Controller will not send out data in this mode if user presses any keys other than digit 1, 2, 3, or no key was pressed in 30 seconds, display mode is ended.
Universal Remote Control NO.
Universal Remote Control NO.
Universal Remote Control NO. Brand Code NO.
Universal Remote Control NO.
Universal Remote Control NO.
Universal Remote Control NO.
Universal Remote Control / Maintenance / Specification No picture, no sound Verify if the television is properly plugged. Verify if the television is properly supplied power. Verify if electricity is available. Blank screen Verify if correct signals are input. Press INPUT button to change signal input to TV input. Restart the television of power supply is interrupted. No sound Press Mute button and verify if Mute mode is set. Switch to other channel and verify if the same problem happens.
Troubleshooting / Warranty exclusive warranties granted by Haier and shall be the sole and exclusive remedy available to the purchaser. Correction of defects in the manner and for the period of time described herein, shall constitute complete fulfillment of all abilities and Responsibility of Haier to the purchaser with respect to the product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict duality or otherwise.
Warranty Haier LED HDTV EN-38
