Quick Guide

Please DO NOT cut off the power of the Beagle camera when it's
working; DO NOT disconnect the camera from the printer when it is
connected to the printer and transmit printable files through the
camera for 3d printing. Otherwise, it will cause printing failure and
damage the camera's firmware. In this case, the camera cannot work
typically; this problem is the user problem, not a quality problem.
Hence, please ensure that you cannot disconnect the camera from
the power supply and the USB cable connected to the printer when
the camera is working, and the 3d printer is printing.
The Beagle camera only supports one printer connection for control,
allowing four users to simultaneously log in and access the camera
(including mobile phone and computer users). Therefore, please
make sure it's securely accessing the device to prevent bad guys
from accessing the camera or printer and the environment to cause
damage.
At the same time, we recommend that you do not let the 3d printer
perform the 3d printing work completely unattended. Please come to
the printer and watch the real printing progress of the printer regularly
to prevent further deterioration of the situation when an abnormal
condition occurs.
This camera shortens the distance between the user and the printer.
The user is obliged to ensure the reasonableness and legality of the
use of the product and avoid infringement of third-party rights, includ-
ing but not limited to publicity rights, intellectual property rights, data
rights, or privacy rights. At the same time, since the customers' use
and storage of this camera are beyond our control, we are not
responsible for possible personal injury or property loss.
This manual is for reference only. In any case, we have the right to
modify and improve it without notifying users. If you want to know the
latest instruction manual, you can go to the official website for more
information.
ATTENTION