X-1000 & MX-1000 Vacuum Series OPERATION Revised 7/02 Model: C80115-01,02,03,04 C80130-01,02 C80155-01,02 C80215-01,02,03,04 SERVICE PARTS CARE
OPERATING INSTRUCTIONS INSPECTION Carefully unpack and inspect your machine for shipping damage. Each unit is tested and thoroughly inspected before shipment, and any damage is the responsibility of the delivering carrier who should be notified immediately. Read all instructions carefully before operating. WARNING Model (X-1000) Dry Pickup Only, C80115-01, 02, 03, 04, C80130-01, 02, C80155-01, 02 Electrical shock could occur if used on wet surfaces. Do not expose to rain. Store indoors.
OPERATING AND FILTER CARE INSTRUCTIONS The Minuteman Model X-1000 Critical Filter Vacuum has been designed to clean up hazardous and toxic dust of all types. A special High Efficiency Particulate Air (H.E.P.A.) filter and a series of “prefilters” used with this vacuum reduce the incidence of airborne dust that would be created by any other method of cleaning. During the removal of hazardous toxic dust, do not sweep, scoop, shovel, or in any manner handle other than vacuuming.
PROCEDURE FOR REMOVING FILTERS AND FOR CLEANING OUT TANK 1. 2. 3. 4. 5. 6. 7. Model X-1000-15 Dry only when used for white room applications with non-hazardous materials Unplug machine from power source. Remove vacuum lid/motor assembly with H.E.P.A. filter. Inspect impaction prefilter No. 9, Page 5. If impaction filter shows discoloration due to dust penetration, replace it with clean filter. Remove cloth filter bag assembly No. 6, Page 17.
4. 5. 6. 7. 8. 9. Use damp disposable towels and wipe down inside of 1 to 1 adapter. Place wipers into plastic bag liner. Unclamp lid latches and remove 1 to 1 adapter. Unclamp holder on underside of H.E.P.A. filter, remove impaction filter and place in plastic bag liner. Collect plastic bag liner from tank rim and tie closed. Remove spacer gasket. Carefully remove plastic bag liner from tank. Do not lift bag out. Turn tank assembly until it is horizontal with floor.
5
Parts List Item 1 2 2a 3 3a 4 5 5a 6 6a 7 8 9 10 11 12 13 14 15 16 17 18 19 20 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 45 46 47 48 49 53 55 56 **** **** Part No.
Parts Listing Item 1 2 3 4 5 6 7 8 9 10 11 12 13 Part No. Qty. Description 760131 805018 805054 750097 750405 760231MCH 380046 380045CTD 760234 760260 711203 711519 711373 1 1 1 Molded Bag Ring Gasket Bag Only Cloth Bag Frame Assembly - plate water shut-off Ring, Bag Retainer Ball, Float Cage Float Assembly Lint Trap Bag Spring, Retainer BLT, 1/4-20 x .
Parts Listing Item Part No. 1 2 2a 3 4 5 6 7 8 9 10 11 12 13 14 15 761054 110902 110901 900036 900112POL 750402 710356 500033 710530 900035 711503 711543 711310 711502 711542 711304 Qty. 2 1 1 1 1 1 2 1 1 1 2 2 2 1 1 1 8 Description Latch Adapter 1:1 PTD Inc. #1 Adapter 1:1 SS Inc. #1 Gasket Intake Plug Assembly SCR-MC 10-32 x .62 Knob SCR-MC 8-32 x .
9
Parts List 15 Gallon Painted/Stainless Tank with Molded Intake Item Part No. 1 1A 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 ** ** ** ** ** ** ** ** ** ** 900001 900003POL 711352 900038 390110 761054 900037PLT 390016 711915 711503 711505 711202 711591 390087 712537 760984PTD 711005 711006 280016 900066 711524 900040 711594 711713 130032 712638 712764 711372 711502 900035 710530 390012 390015 390020 750220 750221 750322 750387 750392 750382 750381 Qty.
Parts List Item 1 1A 2 3 4 5 7 8 9 10 11 12 13 14 15 16 *** *** Part No. 806016PTD 806015PTD 390110 900035 761054 390087 806006 710530 712824 711915 711503 711543 712638 711502 711542 711304 C80601-70 C80601-80 Qty. 1 1 1 1 2 1 1 1 2 4 6 2 2 1 1 1 11 Description 55 Gal. Adapter, Painted 30 Gal. Adapter, Painted Intake Assy Aluminum Deflector, Intake Latch Gasket Diecut Poron Intake Gasket, Raw SCR-MC 8-32 x .50 BR SCR-THMS 10-24 x .75 STPL Rivet-Tube .19 x .
Parts Listing Item Part No. 1 1a 2 3 4 5 6 *** *** *** 900078PTD 900015PTD 900047 900031POL 711203 711591 711505 C90007-80 805037PKG 805046PKG Qty. Description 1 1 1 2 4 4 4 Tank 55 Gal. PTD Less Handles Tank 55 Gal. PTD No Handles Dump Valve Handle, Tank Polished BLT, HH 1/4-20 x .62 Washer, Rubber WSR, Flat 1/4 Tank 30 Gal. Complete Drum Liner 30 Gal. Pkg. 12 Drum Liner 55 Gal. Pkg.
Parts Listing Item 1 2 3 4 5 6 7 8 9 10 **** Part No. 750045 900051 900052 900080 900081 711642 761050 761049 711545 711319 900048 Qty.
14 Part No. 750381 750382 762237PKG 110409 110903 110904 805038PKG 805057 110110 110408 750402 110901 110902 Item 1 1a 2 3 4 4a 5 6 7 8 9 10 10a 1 1 1 1 1 1 1 1 1 1 1 1 1 Qty. Parts Listing Tank Assy. Painted Tank Assy. SS Plastic Liner, Pkg. of 10 Gasket Spacer Adapter 1:1 w/Intake SS Adapter 1:1 w/Intake Painted Disposable Paper Bag, Pkg.
LIMITED WARRANTY Minuteman International, Inc. warrants to the original purchaser/user that this product is free from defects in workmanship and materials under normal use and service for a period of three years from date of purchase. In addition, Minuteman International, Inc. will, at its option, honor labor warranty claims for the first 12 months from date of sale, provided such claims are submitted through and approved by factory authorized repair stations. Minuteman International, Inc.
