Critical Filter Vacuum Model: C82940-00 OPERATION PARTS Revised 6/02 SERVICE CARE
FOR COMMERCIAL USE ONLY IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING DANGER! - THIS VACUUM IS FOR PICK UP OF PARTICULATE MATERIAL ONLY. NOT FOR VAPOR RECOVERY. WARNING - To reduce the risk of fire, electric shock, or injury: • • Do not return to manufacturer for repair. Do not leave appliance when plugged in. Unplug from outlet when not in use and before servicing.
INSPECTION Carefully unpack and inspect your machine for shipping damage. Each unit is tested and thoroughly inspected before shipment, and any damage is the responsibility of the delivery carrier who should be notified immediately. ELECTRICAL This machine is designed to operate on a standard 15 amp. 115 volt, 60 hz, AC circuit. Voltages below 105 volts AC or above 125 volts AC could cause serious damage to the motor.
USER MAINTENANCE INSTRUCTIONS All service and repair should be performed by qualified vacuum service representative or electrician. No user serviceable components are employed in the electrical vacuum lid head assembly. No lubrication of the motor is required. WARNING This vacuum may contain potentially hazardous dust depending on its application. Special handling of contaminated disposable bags and filters is recommended. Disposal must be in compliance with local EPA regulations.
OPERATION AND FILTER CARE INSTRUCTIONS The Minuteman Critical Filter Vacuum has been specifically designed to clean up hazardous dust of all types. Special filters reduce the incidence of airborne dust that would be created by any other method of cleaning. During the removal of hazardous dust, do not sweep, scoop, shovel, or in any manner handle other than by vacuuming. Do not at any time attempt to bypass, remove, substitute or by any other means change the filters used in this vacuum.
(Cont’d) PROCEDURES IN REMOVING CONTAMINATED FILTERS AND CLEANING OF CONTAMINATED TANK 8. Before inserting another plastic bag and paper debris bag, take a wet paper towel and wipe out the inside of the tank of any dirt contaminate. Put this inside the plastic bag along with the used paper filter protector and impact filter. This plastic bag should also be twisted shut, tied into a knot and disposed of properly. 9. To help prolong the life of the H.E.P.A. or U.L.P.A.
1. 829123-1 Lid Assembly Complete 115V 2. 110004 H.E.P.A. or 110007 U.L.P.A. Filter 3 110005 Impact Filter 4. 805058 Cloth Bag Complete 5. 805038PKG Disposable Paper Filter Protector (12) 6. 829000-1 Tank Assembly Complete 15 Gallon 7. 760598PKG Disposable Paper Bag (10) 8.
7
PARTS LIST Item Part No. Qty. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 110007 110005 290017 290030 380064 381020 390062 460000 460003 460010 460019 460031-A 460032-A 460045 460070 700287 711124 711160 711161 711162 711170 711553 711584 712320 715058 715115 715532 740029 833237 740357 740416 809754 829196 740537 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3 19 4 2 1 1 1 2 1 1 1 1 1 1 1 1 1 1 Description U.L.P.A.
9
PARTS LIST Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 Part No. 280018 390031 390035 390011 390016 390087 390110 712532 715383 280017PLT 280016 130032 711594 900008 711518 711524 828984 711352 711444PLT 833831 828980 712766 712541 715452 715531 715532 Qty. Description 1 1 2 1 1 1 1 2 1 2 2 2 2 2 4 2 4 4 4 2 4 4 4 1 1 1 Tank 15 Gallon Burgundy Handle Latch Axle Downtube Gasket Diecut Intake Assembly SCR-MC 10-24 x 1.
TOOLS AND ACCESSORIES A B Part No. Description OPTIONAL 800083 133249 800084 3” Rd Dust Brush Complete Dust Brush HSG 3” Bristle Insert 3” 800035 12” Crev Tool Complete 290000 Wand Asy 1-1/2”, Complete 800317 Hose Assy.
LIMITED WARRANTY Minuteman International, Inc. warrants to the original purchaser/user that this product is free from defects in workmanship and materials under normal use and service for a period of two years from date of purchase. In addition, Minuteman International, Inc. will, at its option, honor labor warranty claims for the first 12 months from date of sale, provided such claims are submitted through and approved by factory authorized repair stations. Minuteman International, Inc.
