User manual

26
Machine Operation
To Turn on Machine:
Turn key to operate position ( I )
To Turn on Vacuum:
Lower squeegee into operate position, vacuum motor will turn on automatically.
To Turn on Brush Motor:
Move brush lift pedal from the “home” (down) position to the operating position (up). Depress the operator bail handle.
Brush motor will turn on and assist to propel the machine forward.
To Turn on Cleaning Solution:
Move solution lever from closed (down) position up to the desired flow position.
To Unload Brush/Pad Driver
Raise the brush deck with the deck lift pedal, foot pedal must be in its “home” position for the brush to unload. Turn operator
keyswitch to the Brush Unload position for approximatedly 1-2 seconds, then release keywitch back to off position (O).
Brush will release and fall to the floor.
CAUTION: Make sure brush deck is clear of all personnel and obstructions before operating Brush Unload.
NOTE: When you no longer want solution or stop the machine for an extended period of time, you must
move the solution lever back to the closed (down) position. Otherwise, solution will continue to flow
onto the floor.
988720UM - ES 1720 User Manual - REV STAR 0707.pmd 7/19/2007, 4:20 PM26