User manual

28
After Use
When finished scrubbing, lift the scrub deck and turn the solution lever off, water flow will cease. Lift the rear squeegee
(the vacuum motor will turn off). Move the machine to a service area for daily maintenance and review items that may
need service.
Empty the solution tank, by disconnecting the solution tank drain hose from the barb fitting over a drain. Rinse the
tank with clean water to prevent any build-up of dried chemicals that could clog the plumbing.
Empty and clean the recovery tank by flushing with a hose. Be sure to also clean the float shut off screen.
Remove the brushes or pad holders and rinse them in warm water and hang to dry.
Remove the rear squeegee, rinse with warm water and reinstall after cleaning.
Check the maintenance schedule in the next section and perform any required maintenance before storing the machine.
Store the machine indoors in a clean dry place. Keep from freezing. Leave solution and recovery tank lids open for
ventilation to prevent odor build-up.
Turn Key switch OFF (O) and remove key.
988720UM - ES 1720 User Manual - REV STAR 0707.pmd 7/19/2007, 4:20 PM28