Specifications

Kleen Sweep 35W – How it Works

The side broom is going to collect dirt out of corners & niches and carries it into the track of the

main broom. Fine dust involved is extracted by a suction fan and held back by a filter. Dust-

free only air will exit the machine.

First Operation

Assembly

To reduce the box volume the handlebar is folded forward and the side broom is packed

unassembled. Assemble these items as follows:

• Unfold the handlebar and secure on both sides with the enclosed hex nuts and

washers. Connect the protective caps.

• Mount the screw to connect the traction drive control bow with the control cable.

• Tilt machine back until resting on the handlebar. Attach side broom with bolt. Bolt

should be torque tightened snugly only to avoid damage to the broom hub.

Installing / Servicing the Batteries

B Open the hood

• Pull the key from the key switch

• Open the hood lock (1) at the front side with a

screw-driver

– Slot horizontal = close

– Slot vertical = open

• Tilt the hood upwards