Lumina 20 Traction Drive Battery Burnisher OPERA TION OPERATION Revised 9/05 SERVICE Model: M26036TD PAR TS ARTS CARE
Table Of Content s Contents Important Safety Instructions ............................................................... 1 Operating Instructions Inspection ..................................................................................... 2 Electrical ...................................................................................... 2 Batteries ....................................................................................... 2 Operation ........................................................
IMPOR TANT SAFETY INSTRUCTIONS IMPORT CAUTION: Operators must read and understand this manual before operating or maintaining this machine. Keep hands and feet clear of moving parts while machine is in operation. Disconnect the power to the machine by pressing the red Emergency Disconnect Button when charging batteries or during installation or removal of pads. During operation, loose objects on the floor can become dangerous projectiles if struck by the high speed pad.
OPERA TING INSTRUCTIONS OPERATING INSPECTION Carefully unpack and inspect your burnisher for shipping damage. Each unit is tested and thoroughly inspected before shipment; any damage is the responsibility of the delivery carrier who should be notified immediately. ELECTRICAL This machine is battery operated and designed to operate on 36 volts DC (3) 12 volt batteries. BA TTERIES BATTERIES Burnishers are shipped with batteries. (3 required) Part No. 956210 12V 210AH 20 Hr.
BA TTER Y SER VICE AND INST BATTER TTERY SERVICE INSTALLA ALLATION ALLA TION WARNING: Battery acid can cause burns. When working on or around batteries, wear protective clothing and safety glasses. Remove metal jewelry. Do not lay tools or metal objects on top of batteries. CHARGING OF BA TTERIES BATTERIES Charging batteries generates explosive gasses. DO NOT CHARGE BATTERIES WHEN OPEN FLAMES OR SPARKS ARE PRESENT. DO NOT SMOKE. Make sure the charger is turned off before disconnecting it from the batteries.
Pad Installation The red emergency disconnect button and power must be in the OFF postion before intallation and the pad driver assembly in the RAISED position. Remove center cup locking device by gripping on outer edges and turning clockwise. NOTE: Center cup cannot be pulled out; it must be unscrewed. After removing used pad, place new pad on pad driver assembly using outer flange of pad driver to center the pad. Push centering locking cup through the pad and into the pad driver assembly.
Base Assembly 5
Parts Listing 6
Mainframe Assembly 7
Parts Listing 8
Housing Assembly Parts Listing 9
Pad Driver Assembly Parts Listing 10
Pressure Control Assembly Parts Listing ITEM PAR T ART 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 260066 260547 260554 260557 260562 260563 260564 710353 711391 712536 715038 715634 760034 762253 833102 QTY 1 1 1 1 1 1 1 4 1 1 1 1 1 1 1 DESCRIPTION OILITE BUSHING PRESS ADJ MOUNT WELD PRESS ADJ SCREW PRESS ADJ SLIDE PRESS ADJ RET BRKT PRESS ADJ RET BRKT ROLL PIN 3/16"X3/4" SCR-MC 10-32 X .37 ST NUT-HEX JAM 3/8-16 ST SCR-MC 10-24 X .
Electrical Assembly Parts Listing ITEM PAR T ART 1 2 3 4 5 6 7 8 9 10 11 12 13 260542 710356 711210 711425 740131 740132 740147 740238 740243 742749 743464 746006 833638 QTY 1 2 2 4 1 2 1 1 1 1 1 1 2 DESCRIPTION BACK PANEL WELDMENT SCR-MC 10-32X.62 STPL BLT-HH 1/4-20 X 1.
Console Assembly 13
Parts Listing 14
Dashboard Assembly Parts Listing Dust Skirt P/N 260616 Carbon Brush Replacements P/N 572003 (Qty 4) 210 amp Hour Battery (Optional) P/N 956210 Paper Bag Replacements P/N 370202PKG 15
SCHEMA TIC DIAGRAM M26036QP SCHEMATIC 16
SCHEMA TIC DIAGRAM M26036QP SCHEMATIC M26036QP,, con’t.
SCHEMA TIC DIAGRAM M26036QP SCHEMATIC M26036QP,, con’t.
LIMITED W ARRANTY WARRANTY Minuteman International, Inc. warrants to the original purchaser/user that this product is free from defects in workmanship and materials under normal use and service for a period of three years from date of purchase. In addition, Minuteman International, Inc. will, at its option, honor labor warranty claims for the first 12 months from date of sale, provided such claims are submitted through and approved by factory authorized repair stations. Minuteman International, Inc.
