Specifications

ManualsBrandsMinuteman ManualsIndustrialSCV2426

Pre-Demonstration Checklist Demonstration Suggestions

How to DEMONSTRATE Guide

SCV™24/26 Rider Scrubber

1. Always view SCV 24/26 video to educate yourself on

the use of the machine.

2. Sweep debris prior to scrubbing if using disc brushes

3. Fill solution tank after Feature/Benefit presentation

is completed

4. Show the use of the Off-Aisle wand

5. Set up the machine and make final adjustments before

demonstrating the scrubber to customer

6. Explain the features starting from the front of the

machine to the back

7. Walk along with the customer when they first operate

the machine

Clean the entire machine

Charge batteries

Check squeegee blades

Bring proper brushes and/or pads

Cleaning chemicals

Cleaning cost analysis

Prepare quotation with lease payments

SCV™24/26 Literature and Fact Sheet

Summary of content (8 pages)

PAGE 1
How to DEMONSTRATE Guide SCV™24/26 Rider Scrubber Pre-Demonstration Checklist Clean the entire machine Charge batteries Check squeegee blades Bring proper brushes and/or pads Cleaning chemicals Demonstration Suggestions 1. Always view SCV 24/26 video to educate yourself on the use of the machine. 2. Sweep debris prior to scrubbing if using disc brushes 3. Fill solution tank after Feature/Benefit presentation is completed 4. Show the use of the Off-Aisle wand Cleaning cost analysis 5.
PAGE 2
1 General Overview The SCV 24/26 is a powerful, close quarter, cleaning rider scrubber. This scrubber will turn in a radius of 59", which allows the operator to clean even the tightest areas with ease. The SCV 24/26 is available in disc or cylindrical scrub decks. The scrub decks are interchangeable just by removing four bolts. This rider scrubber is equipped with either a 24" or 26" deck, and will cover 30,000 to 35, 000 actual sq. ft. per hr. respectively, while the operator rides in complete comfort.
PAGE 3
5 Offset Scrub Deck One of the most unique features on the SCV 24/26 is the offset scrub deck feature. To activate, simply flip the horizontal switch located at the operator's right knee and the scrub deck will slide to the right, offset 2", allowing the operator to scrub right up to the base board. Show your customer the value of this design and how it will benefit them. 6 Cylindrical Motor System The SCV 24/26 cylindrical scrub deck has two 3/4 HP motors to drive the counter rotating brushes.
PAGE 4
9 Easy On/Off Brushes (disc deck) To remove the brushes from the disc deck, simply remove the two 3/8" wing nuts holding the brush shroud in place on either side of the scrub deck. Once removed, show how easy it is to release the gimble mounted driver by simply pressing the two spring arms located on top of the driver to give a quick release of the mount. The gimble mount allows operation on uneven floors with complete brush contact at all times for superior cleaning results.
PAGE 5
13 Safety Features The SCV rider scrubbers come standard with an emergency shut off switch and a master 100 amp magnetic fuse reset. Also, the SCV riders include and hour meter at no additional charge which will allow your customer to schedule preventive maintenance. 14 Transportation Operation The transport direction lever is located on the operator's far right side of the upper control column.
PAGE 6
Bid Specifications for the SCVTM 24/26 Automatic Rider Scrubber Type: The machine shall have two types of easy -to-change cylindrical and disc brush decks and be a 36 volt battery-operated automatic rider scrubber, capable of cleaning a floor by applying solution, scrubbing the surface with either cylindrical or disc brushes and recovering the solution by means of a negative air parabolic squeegee. The cleaning path shall be 24” or 26” in width.
PAGE 7
Bid Specifications for the SCVTM 24/26 Automatic Rider Scrubber Brush Decks: The machine shall use one 1hp motor for the 24” scrub deck and a 1.25hp motor for the 26” scrub deck. Both scrub decks will encompass a double shaft motor with right angle gearbox for the disc brushes and two .75 hp motors for the 24/26” cylindrical brush decks. The disc deck shall rotate at 300 rpm and the cylindrical shall rotate at 900 rpm. The brush deck assembly will raise and lower automatically.
PAGE 8
Minuteman Canada, Inc. 2210 Drew Road • Mississauga, Ontario L5S 1B1 Phone: (905) 673-3222 • Fax: (905) 673-5161 The SCV 24/26 turns in a 60" radius. One chassis, four scrub decks to choose from. Easy to remove brushes for replacement or changing. Easy to adjust rear squeegee. Cylindrical scrubbing deck has a wet sweeping addition. Easy to understand controls. 3 1/3" wide tires that are double cross-hatched for excellent traction. Large 4" rollers that protect the scrub decks and act as a wall guide.