Instructions / Assembly

Directions
WARNING! Removal of old paint by sanding, scraping or other means may
generate dust or fumes that contain lead. Exposure to lead dust or fumes may
cause brain damage or other adverse health effects, especially in children or
pregnant women. Controlling exposure to lead or other hazardous substances
requires the use of proper protective equipment such as a properly fitted
respirator (NIOSH approved) and proper containment and cleanup. For more
information, call the National Lead Information Center at 1-800-424-LEAD (in
US) or contact your local health authority.
INTERIOR USE ONLY
1. Sand floor as appropriate for the type of floor finishing project. Carefully
follow label directions and the directions for the sander that you are
using.
2. Remove all dust, then thoroughly wipe the floor with a clean cloth
dampened with mineral spirits and allow to dry.
3. Before use, stir Minwax® Super Fast-Drying Polyurethane for Floors to
rotate the product from the bottom to the top of the can. You will not
need to stir again if the project will be completed in one day.

Summary of content (3 pages)