Instructions / Assembly

Directions

1. Surface must be clean and dry.

2. Press putty into nail holes or minor imperfections. Colors may be

blended for custom matches.

3. Wipe excess putty from surrounding area with damp cloth. Will not

harden to a sandable surface.

Note: Stain, seal or topcoat before applying putty

CLEANUP: soap and water

PAGE 1
Directions 1. Surface must be clean and dry. 2. Press putty into nail holes or minor imperfections. Colors may be blended for custom matches. 3. Wipe excess putty from surrounding area with damp cloth. Will not harden to a sandable surface.
PAGE 2
CAUTION: May cause slight irritation to individuals with sensitive skin. Wash thoroughly with soap and water after use. FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, get medical attention immediately. WARNING: This product contains a chemical known to the State of California to cause cancer. KEEP OUT OF THE REACH OF CHILDREN. Conforms to ASTM D-4263. Contact a physician for more health information.