SDS

Section 2. Hazards identification
Storage
:
Not applicable.
Disposal
Not applicable.
Hazards not otherwise
classified
:
None known.
Please refer to the SDS for additional information. Do not transfer contents to other
containers for storage.
Supplemental label
elements
Adequate ventilation required when sanding or abrading the dried film. If Adequate
ventilation cannot be provided wear an approved particulate respirator (NIOSH
approved). Follow respirator manufacturer's directions for respirator use. DELAYED
EFFECTS FROM LONG TERM OVEREXPOSURE. Abrading or sanding of the dry film
may release crystalline silica which has been shown to cause lung damage and cancer
under long term exposure. DANGER: Rags, steel wool, other waste soaked with this
product, and sanding residue may spontaneously catch fire if improperly discarded.
Immediately place rags, steel wool, other waste soaked with this product, and sanding
residue in a sealed, water-filled, metal container. Dispose of in accordance with local fire
regulations. WARNING: This product contains chemicals known to the State of
California to cause cancer and birth defects or other reproductive harm. FOR
INDUSTRIAL USE ONLY.
Section 3. Composition/information on ingredients
Calcium Carbonate
50.0
471-34-1
Ingredient name
CAS number
% by weight
There are no additional ingredients present which, within the current knowledge of the supplier and in the
concentrations applicable, are classified as hazardous to health or the environment and hence require reporting
in this section.
Other means of
identification
:
Not available.
Substance/mixture
CAS number/other identifiers
:
Occupational exposure limits, if available, are listed in Section 8.
Mixture
Immediately flush eyes with plenty of water, occasionally lifting the upper and lower
eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10
minutes. Get medical attention.
Flush contaminated skin with plenty of water. Remove contaminated clothing and
shoes. Continue to rinse for at least 10 minutes. Get medical attention. Wash clothing
before reuse. Clean shoes thoroughly before reuse.
Remove victim to fresh air and keep at rest in a position comfortable for breathing. If
not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial
respiration or oxygen by trained personnel. It may be dangerous to the person providing
aid to give mouth-to-mouth resuscitation. Get medical attention if adverse health effects
persist or are severe. If unconscious, place in recovery position and get medical
attention immediately. Maintain an open airway. Loosen tight clothing such as a collar,
tie, belt or waistband.
Section 4. First aid measures
Eye contact
Skin contact
Inhalation
:
:
:
Description of necessary first aid measures
Date of issue/Date of revision
:
4/6/2015.
Date of previous issue
:
No previous validation.
Version
:
1
2/10