SAFETY DATA SHEET 3333 Section 1. Identification Product name Product code Other means of identification : MINWAX® POLYCRYLIC® Water-Based Protective Finish Clear Satin : 3333 : Not available. Product type : Liquid. Relevant identified uses of the substance or mixture and uses advised against Not applicable.
Section 2. Hazards identification Disposal Supplemental label elements Hazards not otherwise classified Dispose of contents and container in accordance with all local, regional, national and international regulations. WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. FOR INDUSTRIAL USE ONLY. Please refer to the SDS for additional information. containers for storage. : None known.
Section 4. First aid measures Most important symptoms/effects, acute and delayed Potential acute health effects Eye contact : No known significant effects or critical hazards. Inhalation Skin contact : Exposure to decomposition products may cause a health hazard. Serious effects may be delayed following exposure. : No known significant effects or critical hazards. Ingestion : No known significant effects or critical hazards.
Section 5. Fire-fighting measures Special protective equipment for fire-fighters : Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode. Section 6. Accidental release measures Personal precautions, protective equipment and emergency procedures For non-emergency personnel : No action shall be taken involving any personal risk or without suitable training. Evacuate surrounding areas.
Section 8. Exposure controls/personal protection Control parameters Occupational exposure limits Ingredient name Exposure limits Ethylene Glycol ACGIH TLV (United States, 4/2014). C: 100 mg/m³ Form: Aerosol AIHA WEEL (United States, 10/2011). Absorbed through skin. TWA: 10 ppm 8 hours.
Section 9. Physical and chemical properties Appearance Physical state : Liquid. Color : Not available. Odor Odor threshold pH : Not available. : Not available. Melting point : 8.5 : Not available. Boiling point : 100°C (212°F) Flash point : Closed cup: 100°C (212°F) [Pensky-Martens Closed Cup] Evaporation rate : 0.09 (butyl acetate = 1) Flammability (solid, gas) : Not available. Lower and upper explosive (flammable) limits : Lower: 0.6% Upper: 20.4% Vapor pressure : 0.31 kPa (2.
Section 11.
Section 11. Toxicological information Name Category Route of exposure Target organs Butoxypropanol Ethylene Glycol 1-(2-Butoxymethylethoxy)-propanol Tetramethyl Decynediol Category 2 Category 2 Category 2 Category 2 Not determined Not determined Not determined Not determined Not determined Not determined Not determined Not determined Aspiration hazard Not available. Information on the likely routes of exposure : Not available.
Fertility effects : No known significant effects or critical hazards. Numerical measures of toxicity Acute toxicity estimates Route ATE value Oral Dermal 70075.7 mg/kg 92720.5 mg/kg Section 12.
Section 14. Transport information DOT Classification TDG Classification Mexico Classification IATA IMDG UN number Not regulated. Not regulated. Not regulated. Not regulated. Not regulated. UN proper shipping name - - - - - Transport hazard class(es) - - - Packing group - - - - - Environmental hazards No. No. No. No. No.
Section 16. Other information Notice to reader It is recommended that each customer or recipient of this Safety Data Sheet (SDS) study it carefully and consult resources, as necessary or appropriate, to become aware of and understand the data contained in this SDS and any hazards associated with the product. This information is provided in good faith and believed to be accurate as of the effective date herein. However, no warranty, express or implied, is given.
SAFETY DATA SHEET 4444 Section 1. Identification Product name Product code Other means of identification : MINWAX® POLYCRYLIC® Water-Based Protective Finish Clear Semi-Gloss : 4444 : Not available. Product type : Liquid. Relevant identified uses of the substance or mixture and uses advised against Not applicable.
Section 2. Hazards identification Disposal Supplemental label elements Hazards not otherwise classified Dispose of contents and container in accordance with all local, regional, national and international regulations. DELAYED EFFECTS FROM LONG TERM OVEREXPOSURE. Contains solvents which can cause permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents can be harmful or fatal.
Section 4. First aid measures Ingestion : Wash out mouth with water. Remove dentures if any. Remove victim to fresh air and keep at rest in a position comfortable for breathing. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Stop if the exposed person feels sick as vomiting may be dangerous. Do not induce vomiting unless directed to do so by medical personnel.
Section 5. Fire-fighting measures Hazardous thermal decomposition products Special protective actions for fire-fighters Special protective equipment for fire-fighters : Decomposition products may include the following materials: carbon dioxide carbon monoxide nitrogen oxides : Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable training.
Section 7. Handling and storage Conditions for safe storage, including any incompatibilities : Store in accordance with local regulations. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see Section 10) and food and drink. Store locked up. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage.
Section 8. Exposure controls/personal protection Hand protection Body protection Other skin protection Respiratory protection : Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary. Considering the parameters specified by the glove manufacturer, check during use that the gloves are still retaining their protective properties.
Section 10. Stability and reactivity Reactivity : No specific test data related to reactivity available for this product or its ingredients. Chemical stability : The product is stable. Possibility of hazardous reactions : Under normal conditions of storage and use, hazardous reactions will not occur. Conditions to avoid : No specific data. Incompatible materials : No specific data.
Section 11. Toxicological information Teratogenicity Not available. Specific target organ toxicity (single exposure) Name Category Route of exposure Target organs Butoxypropanol Category 3 Not applicable. Ethylene Glycol Category 3 Not applicable. 1-(2-Butoxymethylethoxy)-propanol Category 3 Not applicable. 2-Methoxymethylethoxypropanol Category 3 Not applicable. Tetramethyl Decynediol Category 3 Not applicable.
Ingestion : Adverse symptoms may include the following: reduced fetal weight increase in fetal deaths skeletal malformations Delayed and immediate effects and also chronic effects from short and long term exposure Short term exposure Potential immediate : Not available. effects Potential delayed effects : Not available. Long term exposure Potential immediate : Not available. effects Potential delayed effects : Not available. Potential chronic health effects Not available.
Section 12. Ecological information Mobility in soil Soil/water partition coefficient (KOC) : Not available. Other adverse effects : No known significant effects or critical hazards. Section 13. Disposal considerations Disposal methods : The generation of waste should be avoided or minimized wherever possible.
Section 15. Regulatory information U.S. Federal regulations State regulations : California Prop. 65 WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Section 16. Other information Hazardous Material Information System (U.S.A.
Date of issue/Date of revision : 4/6/2015. Date of previous issue : No previous validation.
SAFETY DATA SHEET 5555 Section 1. Identification Product name Product code Other means of identification : MINWAX® POLYCRYLIC® Water-Based Protective Finish Clear Gloss : 5555 : Not available. Product type : Liquid. Relevant identified uses of the substance or mixture and uses advised against Not applicable.
Section 2. Hazards identification Disposal Supplemental label elements Hazards not otherwise classified Dispose of contents and container in accordance with all local, regional, national and international regulations. DELAYED EFFECTS FROM LONG TERM OVEREXPOSURE. Contains solvents which can cause permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents can be harmful or fatal.
Section 4. First aid measures Ingestion : Wash out mouth with water. Remove dentures if any. Remove victim to fresh air and keep at rest in a position comfortable for breathing. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Stop if the exposed person feels sick as vomiting may be dangerous. Do not induce vomiting unless directed to do so by medical personnel.
Section 5. Fire-fighting measures Hazardous thermal decomposition products Special protective actions for fire-fighters Special protective equipment for fire-fighters : Decomposition products may include the following materials: carbon dioxide carbon monoxide nitrogen oxides : Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable training.
Section 7. Handling and storage Conditions for safe storage, including any incompatibilities : Store in accordance with local regulations. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see Section 10) and food and drink. Store locked up. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage.
Section 8. Exposure controls/personal protection Hand protection Body protection Other skin protection Respiratory protection : Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary. Considering the parameters specified by the glove manufacturer, check during use that the gloves are still retaining their protective properties.
Section 10. Stability and reactivity Reactivity : No specific test data related to reactivity available for this product or its ingredients. Chemical stability : The product is stable. Possibility of hazardous reactions : Under normal conditions of storage and use, hazardous reactions will not occur. Conditions to avoid : No specific data. Incompatible materials : No specific data.
Section 11. Toxicological information Teratogenicity Not available. Specific target organ toxicity (single exposure) Name Category Route of exposure Target organs Butoxypropanol Category 3 Not applicable. Ethylene Glycol Category 3 Not applicable. 1-(2-Butoxymethylethoxy)-propanol Category 3 Not applicable. 2-Methoxymethylethoxypropanol Category 3 Not applicable. Tetramethyl Decynediol Category 3 Not applicable.
Ingestion : Adverse symptoms may include the following: reduced fetal weight increase in fetal deaths skeletal malformations Delayed and immediate effects and also chronic effects from short and long term exposure Short term exposure Potential immediate : Not available. effects Potential delayed effects : Not available. Long term exposure Potential immediate : Not available. effects Potential delayed effects : Not available. Potential chronic health effects Not available.
Section 12. Ecological information Mobility in soil Soil/water partition coefficient (KOC) : Not available. Other adverse effects : No known significant effects or critical hazards. Section 13. Disposal considerations Disposal methods : The generation of waste should be avoided or minimized wherever possible.
Section 15. Regulatory information U.S. Federal regulations State regulations : California Prop. 65 WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Section 16. Other information Hazardous Material Information System (U.S.A.
Date of issue/Date of revision : 4/6/2015. Date of previous issue : No previous validation.