Instructions / Assembly

Directions: (For Interior Use Only)
WARNING! Removal of old paint by sanding, scraping or other means may
generate dust or fumes that contain lead. Exposure to lead dust or fumes may
cause brain damage or other adverse health effects, especially in children or
pregnant women. Controlling exposure to lead or other hazardous substances
requires the use of proper protective equipment such as a properly fitted
respirator (NIOSH approved) and proper containment and cleanup. For more
information, call the National Lead Information Center at 1-800-424-LEAD (in
US) or contact your local health authority.
SURFACE PREPARATION:
1. Before staining, apply Minwax® Pre-Stain Wood Conditioner on clean,
raw wood, using a brush or cloth.
2. Allow to penetrate for 5 to 15 minutes, then remove any excess with
clean, dry cloth.
3. Apply stain within two hours of application of Pre-Stain Wood
Conditioner. For best results, stain with Minwax® Wood
Finish™, Minwax® Gel Stain, or Minwax® PolyShades®.
COVERAGE: 125 square feet per quart.
CLEANUP: Mineral spirits or paint thinner, following manufacturer’s safety
instructions.

Summary of content (2 pages)